• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Trajectory Assistance Please

I have put together a 6X284 and did some short range load testing...
Load is:
Lapua brass, 6.5X284,reduced to 6mm, neck turned for clearance in 266 chamber.Once fired.
Primer CCI 200
Powder Rl 22 50.0
Bullet Berger 6mm 108 gr G1 511 G7 262

When I ran the ladder,5 rounds that bracked this powder load hit a reference line on the target exactly 11 inches high at 200 yards....

Question:
Can you run the trajectory for scope adjust at 400,600,800 yards for the next match???
 
What I would suggest you do is come down 5.5 MOA on your scope and that will put you dead on at 200 yards. Then go to the ballistic calculator and use 200 yards as your "zero", it should be easy from there on.
 
Go to www.jbmballisitics.com. Go to calculators and start with Trajectories Simplified. Fill in the blanks (should be able to find your bullet in their Library at top) and play.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,253
Messages
2,215,020
Members
79,496
Latest member
Bie
Back
Top