Things You’d Like to See Made for the Precision Shooter?

[338 Mollett]

The action truing bars are on the drawing board, Prices will be at my cost. The stock is 12.00 a bar I think the grinding is 60.00 an hour .I suggest everybody gets the same thing as far as non hardened or hardened to equalize the cost.. My friends will make them any way you want but will incur individual cost. These will be held to less than one tenth in diameter and run out ! Let me know .

 

[WSnyder]

Let me know

I’d be in for a hardened set.

 

[jonbearman]

218 bee cases I could afford.

 

[Tucker65]

Let me know .

I'd be in for a hardened set also.

 

[338 Mollett]

I got u guys down let,s see how many are interested to make it cheaper for all .

 

[Dusty Stevens]

You know im in. Im a sucker for a centerless grinder

 

[JasonT]

Mollett seems to be doing a great job! I will add that if anybody is not looking to pay center less grinder times, I’d be happy to make some sets of 5 from D2 (~25$/ft raw material) that are hardened and ground between centers around the $300 mark for the whole set. Happy to adjust price as would seem appropriate if that’s way off.

 

[338 Mollett]

Looks like we got three orders. I will need dimensions you guys want.

 

[WSnyder]

Hardened and ground 12" long rods in .0005" increments from .701-.703". Dia .0001” and straightness .0001” per ft or better. Depending on final cost estimate I may also take a .7035” dia.

 

[Hatfield]

Look up the benchrest trotline. Its been done and deemed illegal. Bart has one

Great minds think alike!

 

[JasonT]

Howdy all! Got one order started and have enough material for a second set. First one who calls it gets it!

 

[Tucker65]

Looks like we got three orders. I will need dimensions you guys want.

I'm also interested in the sizes WSnyder posted.

Hardened and ground 12" long rods in .0005" increments from .701-.703". Dia .0001” and straightness .0001” per ft or better. Depending on final cost estimate I may also take a .7035” dia.

 

[338 Mollett]

There are 4 orders now I think that will be plenty for a run of rods and make them cost effective . A final cost can not be given because of time completion estimates but I assure you these can not be in your hands any cheaper in the world . To save even more cost and time I will turn some fat off myself at no cost. I will be sending you PM's for verification . And you never know , one day I will need a favor ! Ralph

 

[AlNyhus]

I'd love to see a high quality, adjustable height shell holder.

Good shootin' -Al

 

[Ringostar]

Reasonably priced light and available trigger guards

 

[Dusty Stevens]

Reasonably priced light and available trigger guards

Thats a definite yes

 

[Chocdawg]

A ‘Foundation’ brand stock with thumb wheel comb adjustment, and 3-way adjustable butt plate assembly for prone sling shooting.

 

[Dave M.]

The longer screws for the legs of the Bald Eagle big 50 front rest. I’m thinking using some threaded rod with a knurled knob welded to the top.
You can’t buy the longer leg screws for the Big 50 rest. Every place that Carried them shows them as discontinued.

Dave

 

[smithcollector]

A ‘Foundation’ brand stock with thumb wheel comb adjustment, and 3-way adjustable butt plate assembly for prone sling shooting.

When I ordered my Foundation they told me they could send it out to have the 3-way butt plate fitted.

 

[Chocdawg]

When I ordered my Foundation they told me they could send it out to have the 3-way butt plate fitted.

Great to hear on the butt stock. I’d prefer to not have to excavate out the K&M hardware, plug it and fit in a thumb wheel setup. I ‘melt’ on stock and usually need refine comb height to say in scope eye box.