Target Scope cleaning service

[escopeta]

Just cleaned another Balvar24 for a member here.

 

[hvacman04]

Have a old Balvar 24 target scope I would like to have cleaned. Is there a good service out there besides Parson’s as he quoted 10-12 months?

Philip Burr, 956-778-0208

 

[escopeta]

Just completed another Balvar 24 for member here. Cloudy reticle. Won’t be doing these much longer due to my health and one every year or so isn’t worth my time.

 

[Murray Brook]

@escopeta
After you clean your scope how do you re-gas it. TKS

 

[escopeta]

These scopes were never sealed or nitrogen filled. None of the older target scopes were N2 filled.

 

[boltfluter]

Just completed another Balvar 24 for member here. Cloudy reticle. Won’t be doing these much longer due to my health and one every year or so isn’t worth my time.

Sorry to hear of your health issues. I am sure the people you helped out are very appreciative. Hopefully you get to feeling better shortly.
Paul

 

[escopeta]

Just completed cleaning another Balvar 24 for customer in CA.

 

[Mblmotors]

Funny coincidence, just had a few months ago Parson’s clean mineral deposits on the reticle of my 24 Bolvar. Took quite a white to get it done, but the glass was perfect when I received it. He did a very good job.

 

[escopeta]

I had tried Parsons several years ago with no luck or very long lead time so decided to do it myself on my scope. Do have a lot of experience in optical systems so nothing strange. The Balvar 24 is the only scope i will work on so I get them turned around within 1-2 weeks.

 

[escopeta]

Just finished another Balvar 24 with dirty reticle. Number 2 for gentleman in CA. A week turnaround.

 

[COLT45SA]

No go with any of them. Guess I will look for parts scope with good reticle and do it myself.

Look up a site called Standard Surplus? They sell all kinds of lenses and optical parts,very inexpensive. You don't need to buy a complete scope.

 

[68Hoyt]

I may need to send you a balavar
I have a kollmorgen that has fogged rear lenses , took it apart and they are white hazed , need to be polished , what do you use to polish lenses ? I googled but curious what you do

 

[escopeta]

I only do Balvar 24 scopes on occasion as the major problem with these is lubricant migration over time on the glass reticle plane and you need to disassemble the whole zoom reticle assembly to work on it. Must be very careful as the metal evaporated on glass is easily damaged. I normally take 1-2 weeks on these.

 

[escopeta]

Look up a site called Standard Surplus? They sell all kinds of lenses and optical parts,very inexpensive. You don't need to buy a complete scope.

Don’t believe you will get these surplus as the optics were made specifically for this scope and matched. B&L also made matching optics for the good Lyman scopes back then.

 

[xring2005]

Don’t believe you will get these surplus as the optics were made specifically for this scope and matched. B&L also made matching optics for the good Lyman scopes back then.

Recently purchased one. It was like new in box. At low power you can see some specs. At high power you can see why appears to be particles on the cross hairs. Do you think this is fixable? If so I would be very interested in your repair service.

 

[ELR LVR]

How do these scope compare to a B&L Balvar 6-24x Variable , like the Elite 4200?

 

[Thud]

Try a good camera lens cleaning service they deal with the same problems in older lenes.

 

[escopeta]

Try a good camera lens cleaning service they deal with the same problems in older lenes.

Unfortunately you have dissaemble the scopes zoom optics to remove the glass reticle and unless you’re versed in them best left to those that know. Easy to get in trouble.

 

[escopeta]

Just finished cleaning another Balvar 24 and cleaned adjustable mount also.

 

[MBunch]

Yes I can have a look. Most of the problems are cloudy dirty reticle plane due to lubricant migration over time. I can usually get this cleaned up.
Send it to me and I will evaluate and get back to you.
Regards
Philip Burr
1042N. Cesar Chavez Rd.
Alamo, TX 78516
(956)-778-0208

Sir, I have a Balvar 24 with specks on the glass but otherwise very clear. Biggest problem is the original adjustments are locked tight. Is this something you can possibly repair?