• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Shooting Rest Equipment

Even though I do not hunt, I am posting here because I wanted to find out what kind of rifle rest equipment varmint shooters use, when shooting from a portable bench. I shoot from a bench at my local range, and had hoped to understand what works well for varmint hunters in a similar situation. Front heavy bag, front mechanical rest, rabbit ear rear bag, squeeze bag, no rear bag, or...? I like to put up as many as many as five targets on a target frame at a time, requiring me to change where I aim, like one might moving from one ground hog to another. I like that flexibility, but do not want to compromise accuracy any more than I have to.

Thanks.

Phil
 
For varmint shooting I prefer to use a bipod with a simple squeezable butt bag or just the forearm and the fist of my left arm to control elevation. I do sometimes use my Caldwell rest, along with the squeezable butt bag.
 

Attachments

  • rest.jpeg
    rest.jpeg
    15.7 KB · Views: 77
I used just about all of them . Farley coaxial .The Farley compact , SEB Neo 2 And Hart's 1 inch LR Rest and the Viper rest .I have choosen the Viper for varminting and Long Range shooting .
 
For PDs I use a table that can rotate 360 deg. but the seat is not attached. This design swivels easily but with a quick twist of a "nut" is locked down rock solid. With this I use a NEO and rear bunny ear bag with heavy sand (no squeeze).
 
Dog Gone Good bags help with the recoil and allow you to see your hits in the scope. This is my cooper 22-250 setup
 

Attachments

  • image.jpg
    image.jpg
    68.6 KB · Views: 122
sdbob said:
Dog Gone Good bags help with the recoil and allow you to see your hits in the scope. This is my cooper 22-250 setup

Another vote for Dog Good Bags here. I have a Cowan rest but it is hard to beat the Varmint bag for flexibility and accuracy.
 
I just purchased a Caldwell field pod. The first time I used it two things br oke on it. The plastic clip that attaches the strap and the three center supports that restrict the legs from spreading out too far.
I called Caldwell and requested my money back. They could not refund my money but did send me a new one, which I immediately sold on Ebay.
I repaired the old field pod and have used it a couple times for chuck hunting. It does provide a good steady rest but it is so well balanced that when I shoot, the whole rest jumps so much that I loose the target in the scope. I can't recommend this product at this time, but maybe a different set up would allow me to view where my shots hit.
 
I use a 15 inch bull bag which provides a very stable yet movable platform for me. My shooting bench does not rotate but I can move from left to right about 90 degrees with rifle in the bull bag. If I have to move more than the 90 degree then I have to pick up the front of the bench and manually move where I want to shoot...no big deal but I have been looking at one of the Caldwell swivel benches... ::) :)
 
I use an elevation adjustable F T/R style bipod with a rear bag. I can rotate my 3 legged bench by pivoting it on the rear leg.
 
I bought this one a while back (Stoney Point heavy front bag) and it has been working well for me

http://www.cabelas.com/product/Stoney-Point-Shooting-Bag/708178.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3Dstoney%2Bpoint%26x%3D-765%26y%3D-51%26WTz_l%3DHeader%253BSearch-All%2BProducts&Ntt=stoney+point&WTz_l=Header%3BSearch-All+Products

on this portable bench which I really like now!

http://www.cabelas.com/product/Timber-Ridge-Shooting-Bench-XL/1168176.uts?Ntk=AllProducts&searchPath=%2Fcatalog%2Fsearch.cmd%3Fform_state%3DsearchForm%26N%3D0%26fsch%3Dtrue%26Ntk%3DAllProducts%26Ntt%3Dtimber%2Bridge%26x%3D-765%26y%3D-51%26WTz_l%3DHeader%253BSearch-All%2BProducts&Ntt=timber+ridge&WTz_l=Header%3BSearch-All+Products
 
DukeDuke said:
I like this! Can you tell me please what and where to buy the components for the front rest?
Sasha_RF said:
i use this

The rack for lifting is taken from a tool microscope.
Horizontal movement carries out the self-made device. The scheme I took from a turning support.
Has made of duralumin
"He" - is much better :)
 
After 45 years of asking myself the same question, the result: Original BR Pivot Lite, Sinclair All-Purpose front rest, Protektor No.13B rear bag = Perfect PD, ground squirrel, range and load development bench setup for all occasions:



'Course, I may be a bit biased....... ;)
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,801
Messages
2,203,718
Members
79,130
Latest member
Jsawyer09
Back
Top