Shell Holder for Norma Brass

[drifter1]

21st centrury fits perfect

Also the new Norma Dasher brass fits the 6 mm BR shell holder on the Sinclair Hand held primer tool.
So far, have trimmed the 50 Norma brass to 1.545" in my Wilson trimmer, turned the same in the 21st century lathe and primed the 50 in the Sinclair Primer Tool. No problems. The Redding case holder is scheduled to arrive 7/7/16. Probably get to try some at the range Friday or Monday.

 

[Kiba]

For those of you with Sinclair priming tools... while a Lee Auto Prime #2 shell holder isn't tall enough to accommodate the thick rim of the Norma Dasher brass, the Sinclair manufactured #2 stainless shell holder (Sinclair PN 105002) that arrived today fits great! It's the 308 family shell holder so it holds the case snugly in the diameter but Sinclair cut the groove tall enough to leave enough room for the thicker rim.

 

[Joe]

I got a brand new rcbs #2 holder and with a Drexel drill cut off wheel and cut the bottom portion off . The thickness is the same compared to the lee holders. That's how I made a shell holder for my Lee priming tool.
Grind center hole out with a dremel grinding stone .I used the pink one that is for sharpening a chainsaw chain.

Has anyone corresponded with Lee about this item. Certainly, cutting off the bottom is an option!

 

[6xcshooter]

Has anyone corresponded with Lee about this item. Certainly, cutting off the bottom is an option!

works great for me, no problems with the 1 I made.