Remington 40x 22 lr
- Thread starter alcornla
- Start date
Liven The Dream
Gold $$ Contributor
What are you looking to do ?
There are good choices for a great stock or copy of Original?
I have done a couple 96% inlets from Richards. I was pretty happy with the results but, it took some work. If you don't mind taking your time and you are happy with the styles they have, give it a try.
One of the stocks I did was for an Anschutz 54 BR rifle. I bought a 2nd in, I believe it was, their "semi fancy" walnut and I was very happy with the wood. It was a 2 1/2" width and I wanted a 3" so I had to add aluminum rails to get the width I wanted but, it was a fun project. The other was just a laminated stock and it was pretty easy to fit and finish.
They aren't crazy expensive so, even if you mess something up, you aren't out a ton of money.
One of the stocks I did was for an Anschutz 54 BR rifle. I bought a 2nd in, I believe it was, their "semi fancy" walnut and I was very happy with the wood. It was a 2 1/2" width and I wanted a 3" so I had to add aluminum rails to get the width I wanted but, it was a fun project. The other was just a laminated stock and it was pretty easy to fit and finish.
They aren't crazy expensive so, even if you mess something up, you aren't out a ton of money.
alcornla
Silver $$ Contributor
Thanks since the gun is not original it does not have to be like the original. I was thinking about their benchrest stock and they will put a 1 1/4 in channel that would work I love the look of walnut or maple but the laminate would be more stable. I don't shoot competition just shoot with friends the original style stock would look ok also. I am getting older didn't know if the bench rest stock would add too much weight the gun is pretty heavy with that bbl. Might have to build a dolly for it. I'm so thrilled with the gun having a ball with it.
snert
Silver $$ Contributor
Sometimes originals in the RF configuration show up for a decent price. For a while Numrich had them for $50. I should have bought a dozen!
Now they rn about $200.
You could also find a 700 SA BDL varmint Special stock or even an ADL walnut sporter from the 80's or earlier and hog out the barrel channel a little...Brownells sells a took to do it by hand...and it will work fine. Barrel may be a tad longish...
Now they rn about $200.
You could also find a 700 SA BDL varmint Special stock or even an ADL walnut sporter from the 80's or earlier and hog out the barrel channel a little...Brownells sells a took to do it by hand...and it will work fine. Barrel may be a tad longish...
Kittitas George
Gold $$ Contributor
My experience with Richard's goes back aways. It was very, very disappointing and still is. I ordered a stock for a M-70 PRE-WAR, I don't remember the grade of wood, but it is very nice. The 'gun smith' that did the 'inletting' told me it was the wrong stock, after the work was done and he had $400 dollars in his hand. I finished the stock and it shot well, but it had epoxy around the tang. I got lucky and found the proper stock here on Accurate Shooter, the rifle is properly bedded but I haven't been able to shoot it yet. So I still have the expensive stock that fits a M-70 PRE WAR in the corner upsetting me. Thanks for letting me finally vent.
lawman29
Gold $$ Contributor
H-S Precision Pro Series Stock Remington 40XB Black
H-S Precision sets the standard in performance and quality when it comes to stocks. Each stock features a 3-piece design. At the heart of every H-S...
www.midwayusa.com
I have my 40x hb in it works good.
PSC023 – Remington 700/40x ADL Short Action Competition Rifle Stock
The PSC023 will fit a Remington 700/40x ADL right hand, short action with a large bull barrel contour. This stock is extremely popular with varmint hunters who shoot from a bench. The PSC023 features a full-length aluminum bedding block and flat forend. Fits: Remington 700/40x ADL right hand...
hsprecision.com
Mark W
Gold $$ Contributor
troupe
Gold $$ Contributor
I tried to reach out to Richard's for some help on a Remington 540 stock, even sent pictures per Richard's direction. Crickets !! I called and was advised I would get a call back, again Crickets !!
Customer Service is enough representation for me to pass on them receiving a dime from me.
R-Nunn makes great stocks and is a great friend, I have 4 of them. None finer, but he is retired. He works on stocks when he can find time. He and his family are very busy this time of year.
Customer Service is enough representation for me to pass on them receiving a dime from me.
R-Nunn makes great stocks and is a great friend, I have 4 of them. None finer, but he is retired. He works on stocks when he can find time. He and his family are very busy this time of year.
Toms
Silver $$ Contributor
I have a factory 40xb heavy barrel stock in very good condition. Was refinished with several coats of true oil. Would take $200. Thanks Toms
GotRDid
Gold $$ Contributor
PM sent.
If u still have it do you mind shooting me a picture
Toms
Silver $$ Contributor
Sorry stock sold long time ago. Thank you Tom
Lumpy’s guns
Gold $$ Contributor
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.