Präzipress vs. Area 419 Turret Press

[ebb]

Mark out of those two which press do you use the most?

 

[Dan-Schenk]

I’m trying to do decide between prazzi and the nexus. I don’t know anyone near me to tinker with them first though. Which do y’all prefer? Either one have notably better feel?

 

[Area51]

I’m trying to do decide between prazzi and the nexus. I don’t know anyone near me to tinker with them first though. Which do y’all prefer? Either one have notably better feel?

The Turban press is easier to use and get the handle where you want it vs the Nexus.
The Turban press is super easy to sell if you don't like it. The Nex is here and easy access, the Prazi will take time to fill the order, however well worth the wait if you are only going to get one.
Some are saying there is flex in the 419, not sure where, you will never hear that about a Turban press.
Simply the finest available on this little struggling planet.

 

[JFrank]

Agree, different class.
Smaller, only takes standard dies.

I’m not sure why a guy would need more than a standard size die. What am I missing ?

 

[Dan-Schenk]

I’m not sure why a guy would need more than a standard size die. What am I missing ?

certain custom dies for large bore

 

[jackieschmidt]

I’m not sure why a guy would need more than a standard size die. What am I missing ?

When I built my full length sizing die for that 338 Ackley Imp, I built it on a 1 1/4 12 tpi to use in a RockChucker with the bushing removed.

 

[ISS]

It works the best if you load 50 BMG...

 

[9.3x64]

I use 1 1/4 inch dies for 7x64 Brenneke.
It was the same price as the 7/8 inch dies and my press accommodates both sizes, so why not.

 

[JFrank]

When I built my full length sizing die for that 338 Ackley Imp, I built it on a 1 1/4 12 tpi to use in a RockChucker with the bushing removed.View attachment 1717896

Yeah that’s about what I figured, that Rockchucker makes dandy ammunition but if a guy wants to dump a grand or so on a press , who am I to criticize.