Präzipress vs. Area 419 Turret Press

[Dan-Schenk]

I’m not sure why a guy would need more than a standard size die. What am I missing ?

certain custom dies for large bore

 

[jackieschmidt]

I’m not sure why a guy would need more than a standard size die. What am I missing ?

When I built my full length sizing die for that 338 Ackley Imp, I built it on a 1 1/4 12 tpi to use in a RockChucker with the bushing removed.

 

[ISS]

It works the best if you load 50 BMG...

 

[9.3x64]

I use 1 1/4 inch dies for 7x64 Brenneke.
It was the same price as the 7/8 inch dies and my press accommodates both sizes, so why not.

 

[ELR LVR]

I don’t even know what I just read. 22 posts and I’m not sure if there’s a question, a statement, or a point. Is this what the kids call getting trolled? I’m going to start a thread titled “I like tater tots”, and see where it goes…..

Please advise, what am I missing?

I think, not sure yet,
it's a justification for shooters to compensate what they're not seeing on target
.... with nicer loading equipment
it makes 'em feel better
---
Like painting your stock

 

[ELR LVR]

Here’s what makes me happy, these days. I buy a nice old gun, do some load work up and testing to find what it likes. If I can get it to shoot, it’s a win. I’m using my old Rockchucker and a Parker tuned scale with RCBS or Redding dies.
View attachment 1716978View attachment 1716979

Screw the gun
THAT is one bad ass table!!!

 

[ELR LVR]

When I built my full length sizing die for that 338 Ackley Imp, I built it on a 1 1/4 12 tpi to use in a RockChucker with the bushing removed.View attachment 1717896

Not fancy enough to be competetive today
Needs some Knurling, some Laser Engraving, and Moscovium nitriding

 

[andrew l]

Let's get this back on topic, shall we?

 

[neckturner]

A question arose as to how consistent guys are sizing brass so I thought I would just do some measuring [...]

Yeah, but if you had done the sizing on a press only twenty-five times more expensive, maybe that stray .0005 wouldn't have shown up.

The RS 3 is a good classic design, with the advantage that the handle is better-centred than many modern presses including the Prazipress, Zero and Hood. The RS 3's only really shortcoming is spent primer management.

 

[neckturner]

I don’t know what the heck was i thinking

Thinking with the wrong head

 

[gmr4]

The type of lube and how even you apply it is just as important if not more so than your press. For BR sized cases the Hood press gives me around a .0005" bump consistency. I could do better if I applied lube more consistently. I just use my fingers and sizing wax. I have a few buddies with a Prazi. Maybe one day I can compare the two. Im not sure improving past .0005" would show on target. But when I get serious I will sort my record rounds to exactly the same bumps and bullet oal. The others are sighters.

I have a new Hood made by Arkco and its by far the most consistent for BRA by far… i use One Shot and it doesnt introduce variance. Follow the directions. Second place is my Co-Az and its close to the Hood… third RCBS…. Ive loaded thousands… that my pecking order.

 

[Area51]

Full or partial disclosure is forthcoming. Later, or when i am in the mood.
Thank you all for p[articpating in this socio economic experiment and data gathering exercise.
We were able to help a few, however this site still retains its current rating and inter link status.
More soon, or soon enough.
Enjoy your tater presses and consumer grade status.

 

[J.d. Popkes]

I had to look it up, knew it……



Trolling is
deliberately provoking others online with inflammatory, deceptive, or off-topic comments to elicit emotional reactions, stemming from fishing (trailing bait) and folklore (mischievous creatures). It can range from childish pranks to coordinated disinformation campaigns, with trolls seeking attention, fun, or disruption, but typically they are best handled by not engaging, blocking, reporting, and taking screenshots, rather than responding.

 

[ebb]

rodomontading

 

[Area51]

What is a chat bot.

There are two main types of chatbots:​

1. Rule-based chatbots
   
   • Follow pre-set scripts or keywords
   • Only handle specific questions
   • Example: “Type 1 for account balance…”
2. AI or conversational chatbots (like me!)
   
   • Use artificial intelligence and natural language processing
   • Understand more flexible, natural questions
   • Learn patterns from data to give more helpful answers

What chatbots are used for:​

• Customer support
• Personal assistants (e.g., scheduling, reminders)
• Information lookup
• Entertainment and education Gonna be a tough one is this "community"
• We have helped a few and that is rewarding enough.

 

[ISS]

I had eleven Tater Tots with a half-pound Ling Cod fillet for dinner this evening. I used taco sauce for dipping. I did not weigh the tots before consuming them. Does that count?

Rich

 

[nwmnbowhunter]

Did your tot ladder reach pressure?

 

[Area51]

Happeee happeeee, on the way.
What a bargain. Record time.

Dear Ladies and Gentlemen,
we calculate here under your order as follows:
Item Description Quantity Unit price Total price
1. Reloading press Heavy Präzipress 120
14 days right to return , 2
years warranty
1.00 piece
2. Shipping Zone 5 USA/Canada 1.00 piece
Export 0% 0.00 EUR
Total gross

 

[Area51]

Real results are the difference between an Ungo and a Porsche, both get you there it's just how.
Good point, price information removed. Easy enough to look that up for anyone interested.

 

[Bc'z]

I think, not sure yet,
it's a justification for shooters to compensate what they're not seeing on target
.... with nicer loading equipment
it makes 'em feel better
---
Like painting your stock

Just had to go there didn't you....
The paint node is real!!