Plastic Scoop for Powder Scale
- Thread starter Killick
- Start date
Quick tip, we used to use a lot of these to provide the operations people with something to collect a sample while processing. They come in all different sizes (volumes) and are intended mostly for single use, then disposal. The companies that make them will send out a free sample, sometimes one, but occasionally three or five, for evaluation purposes. If you have a sense as to how many CCs you'd want, you can get some gratis.
Or talk to a friend in the bulk pharma processing world, and ask him to hook you up.
Or talk to a friend in the bulk pharma processing world, and ask him to hook you up.
If I am loading 40 grains of H4350, about what “CC” size should I get?
I learned a trick at the cast boolits site. Many over there will load handgun cartridges with a home made scoop made form a used cartridge case. For my hand gun loading I use a 9mm case that I drill a hole through the extractor groove and super glue in a brazing rod about 6 inches long for a handle, some glue a popsicle stick flat to the base. The empty case can be ground on a grinder or belt sander to give the volume you need. A larger case could be used, even large rifle cases to fit your need.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.