Peterson Brass 30BR

[dgeesaman]

With a .014" neck thickness

That would be nice but the CIP spec is .268/.269 loaded diameter.

I expect the PPC brass options would either be .2685 loaded neck (.0125 thickness), or 220 Russian with .014 neck thickness.

It would be cool if Peterson made “must-turn-neck” brass but I suspect the lawyers would have to be drunk that day.

 

[RGRobinett]

That would be nice but the CIP spec is .268/.269 loaded diameter.

I expect the PPC brass options would either be .2685 loaded neck (.0125 thickness), or 220 Russian with .014 neck thickness.

It would be cool if Peterson made “must-turn-neck” brass but I suspect the lawyers would have to be drunk that day.

Peterson DOES offer, "must turn" neck-wall thickness brass - I have 500 6.5 Creedmor cases to prove it. When I purchased a 6.5 Creedmor reamer, for a Pal, I oredered 500 Peterson case for SAAMI spec. necks, and 500 with thick neck-walls, for turning to "fit" his desired SAAMI spec [no turn] chamber - now, THAT is cool - Thank You, Peterson! CIP be damned - we are talking about a wild-cat . . . ok, a domesti-cat . . . RG

 

[Sniper338]

30BR and 6PPC

Thatd make me build both eventually.

 

[dgeesaman]

Peterson DOES offer, "must turn" neck-wall thickness brass - I have 500 6.5 Creedmor cases to prove it. When I purchased a 6.5 Creedmor reamer, for a Pal, I oredered 500 Peterson case for SAAMI spec. necks, and 500 with thick neck-walls, for turning to "fit" his desired SAAMI spec [no turn] chamber - now, THAT is cool - Thank You, Peterson! CIP be damned - we are talking about a wild-cat . . . ok, a domesti-cat . . . RG

That is cool. I was going by their products listed on their site.

I fully admit I didn’t call to ask about custom specs.

David

 

[drifter1]

Absolutely needed. Tired of split necks, like the rest of us. Count me in.

 

[Dusty Stevens]

You just gotta look at the people that use the most brass. 30br brass lasts a while but 6br and ppc brass gets replaced a lot. Ppc brass usually gets replaced every match and br brass in whatever end case gets replaced every few matches. Those are the ones that buy the most brass but if you make it they will come

 

[sqrlgtr]

Tim,
Hope this will be in the select line with .1 grain weight variance and .001" dimensions.Im excited about this lol...

 

[Gappmast]

That would be nice but the CIP spec is .268/.269 loaded diameter.

I expect the PPC brass options would either be .2685 loaded neck (.0125 thickness), or 220 Russian with .014 neck thickness.

It would be cool if Peterson made “must-turn-neck” brass but I suspect the lawyers would have to be drunk that day.

I'm sure the lawyers would have their say. Maybe they could do a work around if a loaded case with a unturned neck would be to big to fit the chamber.

 

[swadiver]

30BR please

 

[Gappmast]

In regards to the 6PPC a lot of us like to anneal. The neck and shoulder have to be about the same thickness to anneal correctly. I would suggest contacting AMP, Annealing Made Perfect, they are the experts.

 

[WyleWD]

Yeah, Grendel brass and 6PPC would be GREAT! You'll have to bring your "A" game when you make it. Some (most) of the fellas that use it are pretty picky..... but challenge and competition is what makes the world turn, right? WD

 

[dgeesaman]

I'm sure the lawyers would have their say. Maybe they could do a work around if a loaded case with a unturned neck would be to big to fit the chamber.

Paint the outside of the neck red? Only sell it direct?

David

 

[L W P]

Couldn't you just neck up your line of 7 BR brass and be fine? I personally would like to see 6 DASHER SRP having a PPC flash hole made. Lots of calls for this in several groups from Benchrest, PRS, Varmint hunters and more.

 

[Dave Short]

YES!!! Both 30BR and 6 PPC..... with the same or better material properties and overall quality as the Lapua we're using now of course.

-Dave

 

[Ccrider]

Yeah, Grendel brass and 6PPC would be GREAT! You'll have to bring your "A" game when you make it. Some (most) of the fellas that use it are pretty picky..... but challenge and competition is what makes the world turn, right? WD

This and I would be in for both. Would go ahead and pull the trigger on the 6mm Grendel I have been dreaming on.

 

[topclass2017]

How about some 300WSM?

+1 on 300WSM

 

[sqrlgtr]

Kicking this back up top in case some had missed it.Trying to encourage you to encourage Tim (peterson Brass)to pull the trigger on making 30 br brass lol......

 

[DirtySteve]

I recently bought 400 pieces of Winchester 300 WSM brass. I would gladly toss those in my "box of no return" to buy your brass..

 

[X-Caveman]

I would buy some 30BR brass.

 

[thekriebles]

I know that me and another shooter friend of mine would be buyers of 30BR brass as well.