• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Peterson Brass 30BR

With a .014" neck thickness
That would be nice but the CIP spec is .268/.269 loaded diameter.

I expect the PPC brass options would either be .2685 loaded neck (.0125 thickness), or 220 Russian with .014 neck thickness.

It would be cool if Peterson made “must-turn-neck” brass but I suspect the lawyers would have to be drunk that day.
 
Last edited:
That would be nice but the CIP spec is .268/.269 loaded diameter.

I expect the PPC brass options would either be .2685 loaded neck (.0125 thickness), or 220 Russian with .014 neck thickness.

It would be cool if Peterson made “must-turn-neck” brass but I suspect the lawyers would have to be drunk that day.

Peterson DOES offer, "must turn" neck-wall thickness brass - I have 500 6.5 Creedmor cases to prove it. :eek: When I purchased a 6.5 Creedmor reamer, for a Pal, I oredered 500 Peterson case for SAAMI spec. necks, and 500 with thick neck-walls, for turning to "fit" his desired SAAMI spec [no turn] chamber - now, THAT is cool - Thank You, Peterson! :cool: CIP be damned - we are talking about a wild-cat . . . ok, a domesti-cat . . . :DRG
 
Peterson DOES offer, "must turn" neck-wall thickness brass - I have 500 6.5 Creedmor cases to prove it. :eek: When I purchased a 6.5 Creedmor reamer, for a Pal, I oredered 500 Peterson case for SAAMI spec. necks, and 500 with thick neck-walls, for turning to "fit" his desired SAAMI spec [no turn] chamber - now, THAT is cool - Thank You, Peterson! :cool: CIP be damned - we are talking about a wild-cat . . . ok, a domesti-cat . . . :DRG

That is cool. I was going by their products listed on their site.

I fully admit I didn’t call to ask about custom specs.

David
 
That would be nice but the CIP spec is .268/.269 loaded diameter.

I expect the PPC brass options would either be .2685 loaded neck (.0125 thickness), or 220 Russian with .014 neck thickness.

It would be cool if Peterson made “must-turn-neck” brass but I suspect the lawyers would have to be drunk that day.
I'm sure the lawyers would have their say. Maybe they could do a work around if a loaded case with a unturned neck would be to big to fit the chamber.
 
Couldn't you just neck up your line of 7 BR brass and be fine? I personally would like to see 6 DASHER SRP having a PPC flash hole made. Lots of calls for this in several groups from Benchrest, PRS, Varmint hunters and more.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,817
Messages
2,223,868
Members
79,889
Latest member
Blackrockcustom
Back
Top