Peterson Brass 30BR

[20PPC]

Also please dont restrict the sale of the brass to just 1 or 2 big name suppliers.
Guys like Blue collar reloading could move serious numbers of your brass if they could buy directly from you.

 

[jimmymac]

One thing I would like to see changed would be for them to have .001 more neck wall thickness so you could get a total cut when trimming to .01050 in a .332 chamber.

Are you saying there wasn't enough wall thickness on the stock 6BR brass to allow you to neck turn to your desired wall thickness after you expanded to 30?

 

[20PPC]

No basically it is a light cut to clean up the neck but it still leaves high and low spots so is not a total cleanup.

 

[jimmymac]

No basically it is a light cut to clean up the neck but it still leaves high and low spots so is not a total cleanup.

That won't work for me. Appreciate the input.

 

[ppcshooter]

Gentleman , its Tim at Peterson and we are curious if shooters would want us to make 30BR brass and eliminate some of the steps in the process of making it ? All feedback would be appreciated ! Thanks in advance.

YES!!!Would love to see 30BR brass

 

[Link]

Why would you ask? Just do it.

 

[rjtfroggy]

It sure would make life easy for a bunch of IBS guys.

 

[anschuter2013]

Yes, I would buy 30BR brass. Flat out YES!

 

[Shooter13]

I'll take at least 500 30BR and 500 6PPC (would love to see you make it)! Thanks for asking.

 

[JLW]

Gentleman , its Tim at Peterson and we are curious if shooters would want us to make 30BR brass and eliminate some of the steps in the process of making it ? All feedback would be appreciated ! Thanks in advance.

Peterson making 30BR would be great, I am using your brass in several of my bench rifles now. Jim

 

[T 700]

Yes Please make it !! Life is too short to spend it forming brass!

 

[wildfowler]

I’ve been checking around regularly and hoping someone would start making the brass so I can have rifle chambered in the caliber.

I don’t want to mess around with making brass anymore.

Please do this!!

 

[Rdlningcltchdmpr]

Gentleman , its Tim at Peterson and we are curious if shooters would want us to make 30BR brass and eliminate some of the steps in the process of making it ? All feedback would be appreciated ! Thanks in advance.

Yes and 30gt as well !

 

[20PPC]

@Peterson Cartridge Company a good friend of mine spoke with Savage Rifle Company 6 or 7 years ago about getting them to chamber their model 12 LRPV in 30 BR.
One of their points regarding to not want to go ahead with this clambering was there was no factory brass.
If you were to start production and Savage would get on board it would be an absolute game changer for the shooting community and would be a win win for all involved.
More shooters involved plenty of new rifles sold and you would increase sales substantially.
Just some random thoughts.
Dave

 

[Raythemanroe]

I would like to see some 300 WSM brass.

Ray

 

[sawcarver]

I would love to see some 30BR brass

 

[Gappmast]

+1 On the 6PPC brass. It would be welcomed by many.

With a .014" neck thickness

 

[Shooter13]

Yes Please make it !! Life is too short to spend it forming brass!

Amen to that! Shoot more form less!

 

[JimPag]

Gentleman , its Tim at Peterson and we are curious if shooters would want us to make 30BR brass and eliminate some of the steps in the process of making it ? All feedback would be appreciated ! Thanks in advance.

Put me down for 5 cases as long as the neck thickness is pretty much uniform and the runout from the get go is less than three thousands. I wouldn't mind just turning necks half as much if that's all I had to do because necking up cases is a pain in the butt. I hope you guys do it because in the grand scheme of things as you well know, benchrest cartridges will account for a very small sales percentage.

 

[RGRobinett]

Gentleman , its Tim at Peterson and we are curious if shooters would want us to make 30BR brass and eliminate some of the steps in the process of making it ? All feedback would be appreciated ! Thanks in advance.

You bet - with about 0.015" neck-wall thickness, and 1.560", or so, long, so the cases may be trimmed and turned to, within reason, whatever the reamer dictates. RG