Pay it Forward

[onelastshot]

Time for me to clean out the reloading room next week! I know I've got bullets to give away and I could really use some 6mm brass

 

[long40shot]

If anyone needs this, let me know.

via Imgflip Meme Generator

Bushing head to jonbearman.

 

[Nick Caprinolo]

You got it. Send me your contact information Nick.

Jim
The Decapping die arrived today. It is a beauty and looks new. Rest assured I will get good use from it.
Thanks again.
Nick

 

[jimmymac]

Glad you like it. That die never decapped a single case.

 

[long40shot]

If anyone needs one of these, post it in the thread!

via Imgflip Meme Generator

 

[hogpatrol]

I have two self made wrenches that fit a 5/16 socket for the original Savage muzzleloader breech plugs. Free to good home.

 

[Terry]

I have two self made wrenches that fit a 5/16 socket for the original Savage muzzleloader breech plugs. Free to good home.

Thanks for bringing this back to life.

 

[hogpatrol]

I have a pair of Weaver #16 slotted scope bases and pair of 1" rings, don't know the brand but they have a key in the underneath to fit in to a rail slot. First PM or I'll take it here. The Hornet bullets in a now deleted post have been taken.


According to Midway, the bases fit these firearms:

• Anshchutz Mark 12 (Front & Rear)
• H & R Models 250, 251, 264, 265, 365, 450, 550 (Front)
• Marlin Models 39A round bbl. & 1897 Cowboy (Front)
• Winchester Models 75 Sporter, 75 Target, & 77 (Rear)
• Mossberg Models 35, 40 (Rear), 43, 44, 46BT, 144, and early models (45, 46, 46A, 46B, W/13/16" Barrels)(Front)
• Remington 514 (Rear)
• Savage Models 3 (Rear), 19 & 23 (Front), 93F Heavy Barrel (Front & Rear)
• Stevens Models 53 (Rear), 418 and 4181/2 (Front & Rear)
• Savage MKII (Front & Rear)
• Springfield 83 (Rear)
• Winchester 75 Target (Front)

 

[rebs]

Not now. Maybe in the fall.
I'll throw a 100 bullets in the pool, tho. Let's see. The more prolific calibers should be good. I've got:
Sierra:
6.5mm-120 grain
308-125 grain
308-168 "
224-69 "
224-77. "

"Buyer's" pick.

I could sure use some 224 69 and 77 grain bullets

 

[Olde Man]

I wish to thank Hogpatrol for the AR trigger it will be put to good use.

 

[Terry]

I'm looking for a .337 or so expander mandrel.

 

[Terry]

Bump

 

[Terry_M]

I have a pair of Weaver #16 slotted scope bases and pair of 1" rings, don't know the brand but they have a key in the underneath to fit in to a rail slot. First PM or I'll take it here. The Hornet bullets in a now deleted post have been taken.
View attachment 1127049 View attachment 1127050

According to Midway, the bases fit these firearms:

• Anshchutz Mark 12 (Front & Rear)
• H & R Models 250, 251, 264, 265, 365, 450, 550 (Front)
• Marlin Models 39A round bbl. & 1897 Cowboy (Front)
• Winchester Models 75 Sporter, 75 Target, & 77 (Rear)
• Mossberg Models 35, 40 (Rear), 43, 44, 46BT, 144, and early models (45, 46, 46A, 46B, W/13/16" Barrels)(Front)
• Remington 514 (Rear)
• Savage Models 3 (Rear), 19 & 23 (Front), 93F Heavy Barrel (Front & Rear)
• Stevens Models 53 (Rear), 418 and 4181/2 (Front & Rear)
• Savage MKII (Front & Rear)
• Springfield 83 (Rear)
• Winchester 75 Target (Front)

I can put those to great use.

 

[Terry_M]

Free to a good home RCBS Universal loading block.

 

[JMayo]

Free to a good home RCBS Universal loading block.

I could use a loading block.

 

[JMayo]

I have these 4 die locking rings.
2 different brands as shown.

 

[Hino895]

I could use the die locking rings pm sent.

 

[Terry_M]

I could use a loading block.

Sent you a PM.

Just send me your address and I'll get it on the way.

 

[hogpatrol]

I can put those to great use.

They're yours. PM me your shipping info and I'll get them in the mail tomorrow. Hog

 

[pirate ammo]

Who needs a set of quad rail hand guards for a Fn Fal, I got some. Also, if you got stuff needing somewhere else to take up space I got a special table where everything that is sold
goes into my school supply fund, working on 2020.