Pay it Forward

[VA_XTC_Shooter]

.

 

[JMayo]

I just sent you a pm - let me know if still interested

Pm answered.
Thank you.

 

[boltfluter]

How does this game work gentleman? Lots of stuff collecting dust in my shop!

Paul

 

[JFrank]

How does this game work gentleman? Lots of stuff collecting dust in my shop!

Paul

Paul
It started as a good will toward fellow shooters by passing on something others could use or try out at zero cost" and has continued to bring out the amazing generosity in every member on AS.
I for one hope it never ends.
SPJ

 

[Terry]

It has been a few months ago that I chambered a barrel for free. I have time to do one more. You pay shipping, and if i don't have the reamer you want, you provide me with the reamer. My lathe has a 2" bore so big stuff is welcome too.

 

[hogpatrol]

How does this game work gentleman? Lots of stuff collecting dust in my shop!

Paul

Got a half or partial box of bullets you'll probably never use? Tools that a starting out reloader who's on a budget are always a good PIF item. Amongst other things like the free chamber job (that's beyond PIF!), it can boil down to items that may not be worth selling or reselling and are just taking up valuable space and can be used or enjoyed by another shooter. Reminds me I need to do a check on my gun room. I've got some one inch rings that should go.

 

[boltfluter]

Thanks for the info guys! Much appreciated. Will take a look in the shop and see what I can come up with.

Paul

 

[jimmymac]

It has been a few months ago that I chambered a barrel for free. I have time to do one more. You pay shipping, and if i don't have the reamer you want, you provide me with the reamer. My lathe has a 2" bore so big stuff is welcome too.

That's awesome. Good on you Terry.

 

[jimmymac]

I have a Lyman E-Zee Case Length gauge here collecting dust if someone is interested. I'd like to see it go to a guy just getting started if that's even possible.

https://www.lymanproducts.com/brands/lyman/case-prep-tools/case-gauges/e-zee-case-gauge.html

 

[Terry]

It has been a few months ago that I chambered a barrel for free. I have time to do one more. You pay shipping, and if i don't have the reamer you want, you provide me with the reamer. My lathe has a 2" bore so big stuff is welcome too.

Spoken for.

 

[Terry]

You can partner with me to pay it forward. Send me your used rifle barrels, I'll repurpose them and donate the funds received to charity.

Terry Balding
1777 West Main St.
Suite 203
Sun Prairie, WI 53590

No junk please.

 

[hogpatrol]

Up for PIF is:

One set of 30mm dovetail rings
One set of 1" rimfire rings
One AR-15 trigger, IIRC it was out of a generic AR lower
One Picatinny/Weaver rail level

 

[6.5grendel]

Hogpatrol, do you still have that picatinny bubble level? I'm interested if you do

 

[nmkid]

Don't remember where I got this bad boy. A 6.5-284 case fits just right. Here's your chance to try hand annealing. Send me your address if you want it. Sorry for the bad picture. The nut shown loosens up allowing you to turn the bolt to adjust how much of the cases shows on top for annealing.

 

[hogpatrol]

Hogpatrol, do you still have that picatinny bubble level? I'm interested if you do

Yep, still have it. It's yours.

 

[6.5grendel]

Thank you. I will be going through my things and will try to get them listed tomorrow to contribute.

 

[6.5grendel]

I have a partial box of Hornady 6mm 87gr v-max to give a way. There are 71 in the box. Hornady item #22440

 

[thekriebles]

I have a partial box of Hornady 6mm 87gr v-max to give a way. There are 71 in the box. Hornady item #22440

I'll take these and pay something forward.

 

[6.5grendel]

Thekriebles, pm me your address and I will get it sent as soon as possible. Might not be until Monday.

 

[Bbear]

hogpatrol, you have a PM about the rimfire rings.