• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

OK I GIVE UP..what is a 6BRA ?

retired

i look in the articles saw nothing.
did a search here..no definition lots of talk loading shooting
someone have a pic/print/ description ?
difference from a 6br and a 6 mm dasher ?
thanks
 
Last edited:
It is an improved version of the 6BR with a 40 degree shoulder. Like all improved designs the parent case headspaces at the neck shoulder junction for the fire forming shot. After that it is loaded just like any cartridge, with dies that match the chamber. The A is a reference to AI (Ackley Improved) but not all improved designs were done by Ackley. This one was not, since the case did not exist when during his time.
 
retired said:
i look in the articles saw nothing.
did a search here..no definition lots of talk loading shooting
some have a pic/print/ description
difference from a 6br and a 6 mm dasher
thanks
Click to expand...
The middle cartridge is the 6 BRA with the 6 BR on the left and the Dasher on the right. It is a 6mm BR cartridge with a 40 degree shoulder. It is capable of shooting 105 gr bullet ~2925-3000 fps with H4895, Varget, or Re 15 powder. It has the accuracy of the 6 BR and the velocity of the Dasher. Good shooting...James
DSCF2008.JPG
 
The TAC 40 is just a slightly shorter version of 6 Dasher, with longer neck. The fireform process is the same, false shoulder. The BR ackley headspaces off the br case and is a very easy/friendly process to fireform. I like both cases, the ease to make cases shines with BR ackley, but the TAC 40 especially with so few shooters has certainly made its mark. The TAC 40 currently holds the F-Class midrange National Record. I only have 3 shooters who actually travel to shoot F-Class matches, and those 3 have earned approximately 15 to 20 state titles to my wobbly South Bends credit. I can now say that I took my only 28" BR Ackley barrel out last week and found a place to chronograph some loads. 31.6 gr H4895 hit 2980 with no pressure, 31.8 was slightly past 3000 fps. This in a .236" bore.
 
Last edited:
so i listened to all you mt shooters, built a dasher and now you tell me all i needed was a 40* shoulder on 6 br case!.
damn a spent a bunch of money.
 
Just to make sure I'm absolutely certain, .002" to .004" deeper chamber than a typical 6 BR?

I ask because .004" is the tolerance between go/no-go gauges, therefore a typical 6 BR chamber could allow the .004" with no accommodations.
 
Last edited:
WVHick said:
Just to make sure I'm absolutely certain, .002" to .004" deeper chamber than a typical 6 BR?

I ask because .004" is the tolerance between go/no-go gauges, therefore a typical 6 BR chamber could allow the .004" with no accommodations.
Click to expand...
Hold gauge short, not go deeper for resistence closing the bolt on a new 6BR case. Shallower chamber by .002" to .004"
 
Last edited:
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,802
Messages
2,203,628
Members
79,130
Latest member
Jsawyer09

Share This Page

Back
Top