Offical Reloading Bench Picture Thread

[Skeeter]

Seen just about everyone's gun by now and thought... hey how about some pictures of the place where most of us spend our time.... at the reloading bench ;D

I'll kick this one off with a picture of mine. Gotta expand some more... keep running out of room :

Skeeter

 

[Skeeter]

Another shot of just my cartridge portion

Skeeter

 

[Boattail]

Is that a picture of Gander MOuntain or something?? GEEZ...Nice set up!

 

[aorelup]

Custom modular powder measure.

Custom RCBS .17 cal funnel tricked out to actually 'sit' over 204 cases while dropping charges.

Bent bullet puller (currently in negotiations with Serious Reloader to have it replaced)

Where the magic happens. Take special note of the strategic placement of scale at eye level and custom hole drilled in wood block to hold custom trickler (old 30-06 casing).

Behind the scenes. Don't ask about the ear muffs.

 

[Mikem]

Aorelup.
My suggestion on the bent kinetic bullet puller is to throw it in the garbage can, and get a good bullet pulling die, and you will never go back to the hammer type. There much faster, easier and cleaner.
Mike.

 

[aorelup]

That will most likely be a purchase in the distant future, I have actually worn hearing protection while using that thing.

 

[Clark]

Not piled to the ceiling, yet.

 

[Johnboy]

well guys here are a few pics of my dog house.Or at least thats waht the wife calls it.

 

[aorelup]

Clark,
What are in those boxes?

 

[Ksmirk]

I have to get the inside of the shop finished first I was told before I can start on the man cave, I should have started the man cave before I started the shop but either way I sould have a nice set up when I'm done. The man cave will be 12' x 20' thought so I should have a mess of room but I doubt it will ever look like skeeters! if it does look that way I better start stocking up now. Later,

Kirk

 

[Gearheadpyro]

The Breech Lock press on the left has been replaced by a Forster Co-Ax within the last day or two, hadn't had time to snap more pictures yet.

 

[jerrschmitt]

I do much more than reloading in my little shop.

 

[tmason1]

Skeeter.....do you need a new reloader in your neighborhood? ;D Nice setup.

 

[HHI6818]

Here is my man cave.

 

[Clark]

Clark,
What are in those boxes?

The boxes have dies, brass, and bullets for a particular cartridge.
There are 64 boxes and 54 different cartridges stored.
But it is not evenly shared.
25acp takes up 1% as much volume as 223.

 

[skeetlee]

here is my little piece of the pie. lee

 

[Skeeter]

Hey HHI6818... that's gotta be the cleanest bench I have ever seen ;D Is that bowling alley flooring you used Nice.

Thanks Tmason1... I can always use a reloading buddy.

Skeeter

 

[AlNyhus]

 

[oneflyer]

I'd have to clean up for days to get my reloading area that well organized.

 

[Steve Blair]

Apparently, Al is a class act in the loading room as well as the range.

Who makes that little lathe, Al?