N140 or N150/6 Dasher

[NZ_Fclass]

Is IMR 8208 available in New Zealand? I have not seen any in the US for several years now…

I have a few kilos - it's an ADI powder, Benchmark 8208. I may have had it around a while. The shortage may be that it is used for military ammo in Australia.

 

[JSH]

Which one should I purchase to try first? Will be shooting Berger 105 VLD only. Would be nice to only purchase one and be done. Lol! Any and all advice is appreciated.
Paul

Looking through this thread, looks like a lb of each to me.
Working on a 20BR and trying to gain info/knowledge on VV powders and burn rates on different bore sizes.
If you find some 140, you better snag it.

 

[Longtrain]

I picked up N140 after the usual suspects became scarce. I shoot 105-108’s, accurate, easy to measure. Just works, my go to now.

 

[Happy Jack]

Switched to VV for everything i load for, 133, 140 and 555. Wish they made 22lr ammo

 

[NC/Br Shooter]

TS15.5

 

[Bob3700]

One issue between VV140 & 150 is kernel size. 140 is smaller and for me easier to trickle to a smaller target weight. That might not be an issue for some but having both VV powders I chose 140 for my BRX ( it was the easy button)!

 

[HTSmith]

TS15.5

Very expensive stuff if you can find it

 

[ISS]

Whidden has a pretty good price on both. I went with N150.

 

[Liven The Dream]

140 here Paul, I'm looking to get 540 to try also

Back in the AR days 540 was a wash !
N140 or R -15 worked overtime.

 

[ogre1911]

N150 works very well in my Dashers and is wholly interchangeable with Varget to the 100th of a grain with no real change in speed, Sd etc.

A buddy and I were practicing recently at 600 yds over our shot marker and once I went on record I had 12 left of my Varget load and 8 of N150. Same length measured 105 hybrids, Alpha brass, br4 primers, 32.6 grns and same oal. It was a 200 and mid teen x count with an even mix of random ly placed non x's and around 2 inches of vertical.

Big fan of N150

 

[Bc'z]

Back in the AR days 540 was a wash !
N140 or R -15 worked overtime.

6br
N140= 2780 fps
N540= 2880 fps
Both are my rifles accuracy node, what's ironic is I see alot of 6BRA's running at 2920 with Varget or 4895.

Looking at numbers alone I've come to the conclusion about 2 things...
First, I don't need to go 6BRA
Second, Hodgdon will not get any more money from me.

 

[Longtrain]

In my Dasher I run N140, 108 Bergers, coated with WS2, Russian T556M primers, (best primers ever used, my stock is slowly being depleted). Shot 600 yds today, hammered the X ring, velocity was 2927 fps, SD 4.2. As far as I’m concerned N140 just works. I’m sure there are others, but this works for me.

 

[Keith Glasscock]

N140

 

[ogre1911]

Our SW AZ temperature (at sunrise when we most often shoot) from winter to summer varies from 26 degrees in January to 90-95 in Aug.

Have you noticed 140 to be less or more temp sensitive? I've never tried it in my Dasher.

 

[JFrank]

N140 has been a little on the slow side in my Dasher.

 

[ogre1911]

I noticed that slower speed from an earlier post in this thread. I get 3026-3040 fps consistently throughout the year with 105 Hybrids and 32.6 grains of either Varget or 150

 

[jmill21]

Which one should I purchase to try first? Will be shooting Berger 105 VLD only. Would be nice to only purchase one and be done. Lol! Any and all advice is appreciated.
Paul

140 here..