i use my hawkeye everytime i clean my guns. one tends to get complacent during repetitive actions, so i got used to the "clarity". yesterday i noted a piece of lint when checking to see if i had removed the carbon ring. i removed the angled eyepiece and cleaned all lens surfaces with lens cleaner and q-tips. did the same for the angled mirror...several times. reassembled and looked into the bore...HOLEY MOLEY! it was as if i had had a cataract removed! i could see the very faint reamer marks in the freebore and on the slope of the lands and the edges of the lands were clear and sharp. i kicked myself for not paying attention. now i'm going to clean all my scopes lenses.
my hawleye borescope is crystal clear again!
- Thread starter lpreddick
- Start date
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.