youre saying u purchased a powder called Midwest 415? i never heard of midwest powderBought 9lbs of Midwest 415,operable to hodgdon 345 loading some 223s 55 grain bullet max load is 24.5 grains what should the minimum be. Any ideas,hodgdon says 335 min is 21.4
American reloading. This powder must be a repack of pull downs as they sell a lot of pulled bullets. I got over 500 Hornady .308 interlocks for like $50 something my last order and about the same for 500 Nosler ASP HP 9mm but I had to sort weight for both.youre saying u purchased a powder called Midwest 415? i never heard of midwest powder
thanks for the info Broke——. i suppose we will hear more about this companyAmerican reloading. This powder must be a repack of pull downs as they sell a lot of pulled bullets. I got over 500 Hornady .308 interlocks for like $50 something my last order and about the same for 500 Nosler ASP HP 9mm but I had to sort weight for both.
Got it from American reloading, other people said it's ok,I was told it's military overrun powder also people that bought it said it's ok,at $209 for 8lbs not bad no hazmat charges, look at it American reloading, heading out in the next couple of days to chronograph it,21 grains to 25 grains 3 bullets each number. I'll put up how it looks FPSyoure saying u purchased a powder called Midwest 415? i never heard of midwest powder
I bought 1000 223 bullets said it's 62/55 grains $75 got 24 62 grain and all the rest was 55 to 57 grains all blems no accuracy there just plinking wanted the 62s for subsonics.American reloading. This powder must be a repack of pull downs as they sell a lot of pulled bullets. I got over 500 Hornady .308 interlocks for like $50 something my last order and about the same for 500 Nosler ASP HP 9mm but I had to sort weight for both.
That's my plan,thanksGo with the Hodgen min and work up slowly.
Frank
Bought 8lbs of Midwest 415,comperable to hodgdon 335 loading some 223s 55 grain bullet max load is 24.5 grains what should the minimum be. Any ideas,hodgdon says 335 min is 21.4
Thanks going out tomorrow chronograph some loads see what I gotI own and have shot and tested TONS of these MW powders from American for many years. Excellent stuff. Used to get 8lb jugs for under $100 prior to COVID..
I have MW equivalents of VV N133, N550, N555, H335, BL-C2, Longshot, W572, 8208, and many others.
They have all shot EXCELLENT.... You just need to do load workup with it...
Right around 26gr was stupid accurate with Hornady 62 FMJ-BT and SS109's with my MW H335 equivalent our of a 16" Wilson Combat AR...
thanks- be interesting to know where it actually comes fromI own and have shot and tested TONS of these MW powders from American for many years. Excellent stuff. Used to get 8lb jugs for under $100 prior to COVID..
I have MW equivalents of VV N133, N550, N555, H335, BL-C2, Longshot, W572, 8208, and many others.
They have all shot EXCELLENT.... You just need to do load workup with it...
Right around 26gr was stupid accurate with Hornady 62 FMJ-BT and SS109's with my MW H335 equivalent our of a 16" Wilson Combat AR...
I'm waiting for "Similar to Unique" to be available again. That stuff goes fast. Honestly though as I just looked, since they are $209.99 I may look at standard commercial powders. You can find Vihtavuori for 279.99 with known load data. I'm a cheapskate as I have to be but at $10 a pound difference for unknown powder. The upside is their price is delivered.
Testing the 415 powder from American reloading/Midwest powders is in.Go with the Hodgen min and work up slowly.
Frank
went to american reloading and it says all midwest powders are sold out. if they get some back in stock in future i may try them.Bought 8lbs of Midwest 415,comperable to hodgdon 335 loading some 223s 55 grain bullet max load is 24.5 grains what should the minimum be. Any ideas,hodgdon says 335 min is 21.4