• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

March majesta scope

Skedaddle Shooter said:
Any particular rings you guys prefer for a scope of that weight?
Click to expand...
The extra weight of the Majesta compared to say the 10-60X56 HM or similar riflescopes, is not really a problem for rings.

That said, I'm partial to the Burris XTR Signature rings with the inserts. The inserts have many advantages in my opinion:
  • Preserve the finish of an expensive riflescope.
  • Proper alignment of the riflescope in the rings; no stress.
  • Better grip on the riflescope compared to a metal ring.
  • And most important: setup the riflescope so that it's really close to mechanical zero (optical sweet spot) at 1000 yards. At those prices, I want the best IQ.
 
Turbulent Turtle said:
The extra weight of the Majesta compared to say the 10-60X56 HM or similar riflescopes, is not really a problem for rings.

That said, I'm partial to the Burris XTR Signature rings with the inserts. The inserts have many advantages in my opinion:
  • Preserve the finish of an expensive riflescope.
  • Proper alignment of the riflescope in the rings; no stress.
  • Better grip on the riflescope compared to a metal ring.
  • And most important: setup the riflescope so that it's really close to mechanical zero (optical sweet spot) at 1000 yards. At those prices, I want the best IQ.
Click to expand...
Thanks!
 
Shot my first match with the majesta today. It was a 600 yard match in Beaumont. I kept the magnification at 80 for all three matches. Of course mirage got worse as the day went on but I was still able to see the target fairly clearly, it was bouncing around a good bit for the last two matches but I could still see the scoring rings very good. For the first match the target was clearer on 80 power than it ever was with my golden eagle on 40 power. This thing is awesome.
 
avidflyer said:
What reticle is that?
Click to expand...
@Ranger188 is correct. It's the MTR-W1. The WFD doesn't really suit my shooting style but the W1 definitely does (as does the W2 which is basically the same reticle but no vertical reticle on the top side). I like both but use the vertical aspect just enough that decided to stick with the W1. I have one friend with both a W1 & WFD, another friend with the WFD and another with the W2 and they're all happy with their choices.
 
Last edited:
If the WFD did not exit, I would favor the W2 for F-class as it's similar to the MTR-2/MTR-5. That's one of the many nice things with the Majesta, many different reticles to chose from.
 
F Class John said:
Some 600yd shooting and I'll have 1000yd views in a day or two once I'm done putting the video together. Overall I LOVE this thing so far.
Click to expand...
Interesting initial review. I just want to address this issue of sunshade and amount of light. In my experience, the only time there may be a discernable difference in perceived amount of light coming into an optic like a camera lens, a riflescope or a spotting scope is at the very minimum magnifications. In fact, I have only ever seen that with wide angle lenses.
 
You can get the titanium rings here. Pricey, but works with the Majesta.
www.marchscopes.co.uk

MARCH Scopes Superlight Titanium Rings - MARCH Scopes​

These are a new and very clever design in which the full diameter of the scope body has contact with the titanium ring, when mounted correctly (see below) this will not mark or stress your scope in any way. The rings have been precisely CNC manufactured with Aircraft grade Titanium. We...
www.marchscopes.co.uk
www.marchscopes.co.uk
 
My scope caps for the Majesta scope is now available:

SELLING - Scope caps w/free shipping (Majesta added 5-31-24)

I’m once again selling the vinyl (rubber) scope caps that protects your lenses during storage and cleaning. TYPE A = Nightforce Benchrest 8-32X56 Nightforce Benchrest 12-42X56 Sightron SIII 10-50X60 TYPE B = Nightforce NXS 8-32X56 Sightron SIII 8-32X56 March 5-50X56 March 6-60X56 March...
forum.accurateshooter.com
 
@TonyinKY Nice caps. I think you can expand your list of March scopes for which you now have the caps. For instance, you're missing the entire FFP line.

With your type B, you also file the March-FX 5-40 series, including the Gen II with the Shuriken knobs.

With your new type I, you also fit the March-FX 5-42X56 series, including the newly announced Gen II.

If you took the objective lens cap for the type H and the eyepiece lens cap from the new type I, this combo would fit the March-FX 4.5-28X52.
Your type H also fist the March 2.5-25X52.

If you were to create an objective lens cap for the 42mm objective (O/D: 51mm) you would then be able to add the March 2.5-25X42, the March 3-24X42, the March-FX 1.5-15X42 and the March 1.5-15X42.
 
Last edited:
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,750
Messages
2,183,454
Members
78,500
Latest member
robbsintexas

Share This Page

Back
Top