Low budget rest feet

[JFrank]

The main point of this post was that if someone wanted to, they could use whatever materials they have at hand to make some f/class feet. These were scraps headed to the recycle bin, so they cost me nothing. Took maybe 15 minutes in total to make. I do have some extended screws now, just need to point them.

You could make a port level ammo caddie out of the same materials. the bracket is as simple as a flex lamp from wally world.

 

[Fast14riot]

You could make a port level ammo caddie out of the same materials. the bracket is as simple as a flex lamp from wally world.

I've made my own 100ct loading blocks. I'm thinking of a timer/ammo block combo holder too. I've made all kinds of things for shooting and reloading. Here's one thing I made recently...

 

[Bc'z]

I've made my own 100ct loading blocks. I'm thinking of a timer/ammo block combo holder too. I've made all kinds of things for shooting and reloading. Here's one thing I made recently...View attachment 1141380

It needs to be big enough to hold my 10 10
And legs to elevate about 8" so I can keep my face off the bench top.
I like the cut out for the trickle also.

 

[Fast14riot]

It needs to be big enough to hold my 10 10
And legs to elevate about 8" so I can keep my face off the bench top.
I like the cut out for the trickle also.

I use an old smart phone as a magnifying monitor on the pointer so I can sit comfortably and eliminate parallax when viewing

 

[Bc'z]

I use an old smart phone as a magnifying monitor on the pointer so I can sit comfortably and eliminate parallax when viewing

I've saw this before.
If the scale was elevated it would still leave a lil bit of bench space under it