• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Looking for load data 20 practical

Hi guys
Need some load data
.20 practical
Lake City brass
Remington 7 1/2 br primer
Nosler 32 gr. Bullet

Powders I'm looking for start and Max loads
H335
IMR 8208 xbr.
Thanks
 
Hi guys
Need some load data
.20 practical
Lake City brass
Remington 7 1/2 br primer
Nosler 32 gr. Bullet

Powders I'm looking for start and Max loads
H335
IMR 8208 xbr.
Thanks


Come on...Any one..I got the h335..Now I just need the 8208..
Help a brotha out
 
Use .20 Tactical data to start and work up from there. I use imr4198 or BLC-2 in my .20P. Some say subtract 2 grains from .204R data, most of my loads worked out very close to that, but using .20 Tac data I feel is safer.
 
Keep Googling!! My .20 Practical should be ready in about 2 months. I have spent various hours chasing all posts in different forums and presently have about 15 loads to choose from. It appears from my "chasing" that H-335, 8208, H-4198, Benchmark and H-4895 are what most shooters are using. That pretty much narrows it down huh? LOL.
 
Bolt gun or AR?


AR, from what I've been reading it seems the .20 practical shoots well with just about any powder ..It will be hard to narrow things down I'm sure...
I'm going to try
H-335
IMR 8208 xbr
And H-4198
Stopping there. I have a bad habit of constantly changing powders and looking for one magical load. I find by doing this I never really finish my load development.
I'm trying to stop some bad reloading practice ( in my opinion) and follow through.
After all I reload because I like to find the best possible load for a given rifle.
 
Last edited:
I shoot benchmark and 32g Vmax or Blitzkings. My load is 25.7 grains of Benchmark loaded to mag length for my AR.
 

Attachments

  • 2.jpg
    2.jpg
    563.1 KB · Views: 40
AR, from what I've been reading it seems the .20 practical shoots well with just about any powder ..It will be hard to narrow things down I'm sure...
I'm going to try
H-335
IMR 8208 xbr
And H-4198
Stopping there. I have a bad habit of constantly changing powders and looking for one magical load. I find by doing this I never really finish my load development.
I'm trying to stop some bad reloading practice ( in my opinion) and follow through.
After all I reload because I like to find the best possible load for a given rifle.
I'm with you on one powder. For an AR 20, I've settled on VV 133 because it's consistent and clean.
 
Cool stuff!! Thanks guys..When I posted question I was sitting at reloading bench..I ended up using 204 Ruger data and subtracting 2gr. As a start load and went up in .5gr incriminates
Now I have three loads worked up
8208 xbr
H-335
And H-4198
This should let me know the high pressure threshold in my rifle, and what powder my rifle likes best..
Thanks
I will post results in a week or so as that is when I can get out and shoot next
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,516
Messages
2,197,821
Members
78,961
Latest member
Nicklm
Back
Top