Let's See your New for 2015 Rigs

[JamesnTN]

Here are my new to me rifles. Both are RBLPRE the multi flat is a B action and the round is a MB. Both stocks are Leonard's and both scopes are the NF competition. The 6 Dasher has a Krieger 8 twist while the 22 Dasher sports a Brux 8 twist both HV contours.

Next is my Bat M RBLPRE bedded in a Tooley MBR stock topped with a NF BR scope. Barrels for this rifle are shown a Brux 9 twist 284 Shehane, a Brux 8 Twist 6 Dasher and a Lilja 10 Twist 300 WM.

 

[GT Accuracy]

Couple beauties there boys! Any of them draw blood this 2015 summer

 

[mikecockcroft]

Built this for my daughters Masters in Accounting graduation gift.
Stiller Predator, 280 AI, Brux, HS Precision, BDL bottom, Shrewd brake, Timney, Leupold VX-6 3x18, Aluma Hyde barrel
Fired two sighters then two three shot groups with 160 accu bonds, was pleased to say the least.

 

[MahtewsSB]

Finished the rifle about 2 months ago and have been forgetting to post it up!
Specs:
6.5x47 Lapua
Remington 700 action
Krieger 28" #17 contour 1:8" twist
Timney Calvin Elite trigger
Bell and Carlson stock
NF SHV 5-20x56 MOAR illuminated with NF base and vortex match precision rings and vortex level bubble
PTG bottom metal and accuratemag 5 round magazine

Have loads worked up for Berger 130 vlds and Hornady 95 gr vmax. Both will shoot sub .25 moa as long as i do my part on the reloading bench and behind the trigger. The 95 vmax is absolutely devastating on coyotes, hides are virtually useless however.

 

[GT Accuracy]

How are you liking that Calvin Elite trigger MatthewsSB

 

[MahtewsSB]

How are you liking that Calvin Elite trigger MatthewsSB

I love it. It has performed flawlessly for me and has a very nice, clean, crisp break.
I have never shot a jewel or any other trigger of these sorts so I can't compare but for me it is great and I would definitely recommend one to anyone looking or a new trigger.

 

[Cat MD]

Jon Beanland 6.5x47 has taken a pile of coyotes, hogs and filled the freezer with deer meat!

 

[Cigarcop]

Jon Beanland 6.5x47 has taken a pile of coyotes, hogs and filled the freezer with deer meat!

Jon builds a GREAT rifle and is one heck of a nice guy!

 

[mikecockcroft]

Rachel put her new rifle to good use this weekend!!!!!

 

[potatoe]

Rachel put her new rifle to good use this weekend!!!!!

Great job! but what is that thing?

 

[mikecockcroft]

Nilgai also call a "blue bull". Imported into south Texas in the 1920's I believe, from India. Mostly found in the vicinity of the King Ranch and surrounding area.

 

[potatoe]

Are they just wild then?

 

[mikecockcroft]

Are they just wild then?

Yes. Running wild over hundreds of thousands of low fenced acres.
Very wild and tough to kill.

 

[Jaybo]

Finished the rifle about 2 months ago and have been forgetting to post it up!
Specs:
6.5x47 Lapua
Remington 700 action
Krieger 28" #17 contour 1:8" twist
Timney Calvin Elite trigger
Bell and Carlson stock
NF SHV 5-20x56 MOAR illuminated with NF base and vortex match precision rings and vortex level bubble
PTG bottom metal and accuratemag 5 round magazine

Have loads worked up for Berger 130 vlds and Hornady 95 gr vmax. Both will shoot sub .25 moa as long as i do my part on the reloading bench and behind the trigger. The 95 vmax is absolutely devastating on coyotes, hides are virtually useless however.

 

[MahtewsSB]

Jaybo, did you have a question about my rifle? You quoted my post about the specs of it, but didn't put any content with it. If you have any questions let me know.

 

[markT]

Here's mine. Savage Model 12: PTA / 22BR / Shilen: SS Bull / 1:14 TW / Choate : Ultimate Sniper Stock. Will install Leupold : VIII 8.5 x 25 / Target Dot / Warne: QD rings.

 

[germanlongbow]

This my 20-250 I built last spring to attempt 1000 yard shooting. Surgeon action 591 R/bottom metal. McMillan A5 adj. PacNor 1.250 x 30 1x9 twist. Jewel HVR. Shoots consistent 0.1's. Muzzle is threaded 1/2x28 for tbac 223P1. Scott

 

[MBuechle]

Built a .22-250 upper for my Armalite AR10 last June. Schneider 9 twist finished to 27". 17" gas system, very easy on brass. Only had two weeks to get ready for a prairie dog hunt in July so didn't do much of a load work up, a couple of OCW strings, picked the most promising powder charge and cranked them out. Very happy with the way the gun shot.

 

[PAshooter20BR]

257 weatherby - Mcmillan hunter stock pillar bedded, stainless trued remington 700, cerakoat reciever - polished bolt, Bartlien 2b fluted by Kampfeld, blackened flutes, polished PTG stainless bottom metal, rifle basix trigger. Leupold VX-6 3-18x44. Built by Dave Bruno. 80 TTSX at 3900.

 

[370bc]

I actually had this built last year but do to a torn bicep and a major kitchen remodel I only had it out one time and barely even worked up a load so I'm kinda counting on it for this year along with another one in the works but that one probably wont be finished in time.

6AI Defiance Deviant LA
8 twist Bartlien 28" RVC
Jewel trigger
HS DBM
Mcmillian Gamescout
Nightforce Competition scope

What does that beautiful vixen weigh in at??