• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Lee Universal Decapping Die

Mark W

Gold $$ Contributor
Well, after running thousands of cases through the Lee Universal Decapping Die over the years included crimped military brass, I finally managed to ruin my first pin by running it into a berdan primed case.
 
I turned mine to go in to a 20 caliber neck. It is very handy for my interests. Like a couple guys here I picked up two extra 10 years ago. They still look good in the package.

Greg
 
I busted my rcbs decapped on a berdan case as well. But I needed the whole rod.
Rcbs was great had a replacement shipped to me and extra pins.
I stuck it in my drill press and using a file got it to fit in my 204r brass
 
I bought a Mighty Armory decap die and its the toughest thing Ive ever used. It has repeatedly hit berdan cases and even punched out small Lapua flash holes with never an issue although you can get the smaller pin.
www.mightyarmory.com

Mighty Armory Magnum Universal Decapping Die

Mighty Armory’s innovative decapping die designs utilize a spring-loaded primer flicker. Eliminate primer pullback and prevent primer shoot jams!
www.mightyarmory.com www.mightyarmory.com
 
I have 2 Lee decapping dies. 1 is turned down to be used on Lapua small flash holes. I also keep extra pins for both. My big flash hole decapping die pin I had to replace after years of service. It's demise was due to a staked .223 primer, after of course many.
 
Dgd6mm said:
I have 2 Lee decapping dies. 1 is turned down to be used on Lapua small flash holes. I also keep extra pins for both. My big flash hole decapping die pin I had to replace after years of service. It's demise was due to a staked .223 primer, after of course many.
Click to expand...

I had wondered about turning the pin. I think I'll give it a whirl. Worst thing that can happen is I ruin a pin.

Thanks for the heads up.

Greg
 
I destroyed my RCBS decapping pin with a berdan primer. I had to replace the die pin. I then bought the Lee Decapping die and was really liking it until I hit another dang berdan. Amazon had a multi pack of the Lee pins so I bought a few.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,429
Messages
2,195,914
Members
78,902
Latest member
Kapkadian

Share This Page

Back
Top