• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Inter arms mark x part needed

You could check the sear available for Parker Hale mausers at Numrich. Its similar and may need some adjustments at the trigger bar interface.. model 2100 or 98 commercial
 
Hi
I ordered the sear from zastava and installed today. Have not assembled the gun yet but I’m hopefull! Thx for all the help!
 

Attachments

  • F01E511D-EDD5-4D66-A198-EFC60E76DBAB.jpeg
    F01E511D-EDD5-4D66-A198-EFC60E76DBAB.jpeg
    549.6 KB · Views: 6
The guns together but the sear was not a exact part, worked for the trigger interface but didn’t hold back the hammer on the bolt.
The firing pin assembly would pass over the sear and not be cocked. So I could buy a new hammer or tig weld the old hammer ,I welded the hammer now everything works safety as well now on to the range
Thx for all the help every one!!
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,855
Messages
2,224,524
Members
79,999
Latest member
Snype97
Back
Top