Inter arms mark x part needed

[kawsam62s]

This is the left side
Right side just has serial number

Can’t make out anything from your pic

 

[Ggmac]

Its a mini so Id buy the only one available to you from Gunsandgunsmithing post 16 .

 

[gunsandgunsmithing]

Thx but the safety is different?

Is yours like this one?

 

[kawsam62s]

Is yours like this one?

 

[kawsam62s]

Is yours like this one?

See pic below safety looks different

 

[Ggmac]

same

 

[Ggmac]

You could check the sear available for Parker Hale mausers at Numrich. Its similar and may need some adjustments at the trigger bar interface.. model 2100 or 98 commercial

 

[DGP4]

The Zastava part looks identical to your sear, is in stock and costs 10 bucks.

 

[kawsam62s]

Hi
I ordered the sear from zastava and installed today. Have not assembled the gun yet but I’m hopefull! Thx for all the help!

 

[DGP4]

Let us know how it works. It can help others.

 

[kawsam62s]

The guns together but the sear was not a exact part, worked for the trigger interface but didn’t hold back the hammer on the bolt.
The firing pin assembly would pass over the sear and not be cocked. So I could buy a new hammer or tig weld the old hammer ,I welded the hammer now everything works safety as well now on to the range
Thx for all the help every one!!

 

[kawsam62s]

Test fired this past weekend , all worked well with made up reloades.
Thx for the help again!