Ingenuity Precision Trickler (powder meter)

[454bore]

This question is aimed at those that have upgraded their Autotrickler by adding the Ingenuity Precision Trickler: Are you satisfied with the product? Is the benefit worth the cost? Any regrets?

Thanks

454bore

 

[shoot4fun]

YES
YES
NO

 

[quest450]

/\/\/\/\/\ what he said !

 

[shoot4fun]

This question is aimed at those that have upgraded their Autotrickler by adding the Ingenuity Precision Trickler: Are you satisfied with the product? Is the benefit worth the cost? Any regrets?

Thanks

454bore

The IP may seem expensive and unnecessary to many (it did to me when I first found out about it).
Once you have it on your bench you will immediately see why it's actually a bargain. Paul is anal with precision and every single piece of this thing is pure precision. It was easy to put together and set up and is much faster and more accurate than the original V3 trickler.
My only regret is not buying in sooner.

 

[Matt_3479]

Absolutely love it! Totally worth the upgrade in my opinion. I wish I bought mine sooner for sure

 

[rwj]

The IP may seem expensive and unnecessary to many (it did to me when I first found out about it).
Once you have it on your bench you will immediately see why it's actually a bargain. Paul is anal with precision and every single piece of this thing is pure precision. It was easy to put together and set up and is much faster and more accurate than the original V3 trickler.
My only regret is not buying in sooner.

Is the IP now incorporated with the V4?

 

[ACard]

Absolutely 10/10

 

[Gabe22BR]

Should have came with the Auto throw from the start !!!!

I have recently upgraded my powder hopper-
2 stainless disk to cut off the powder- which should have been standard as well…good friend made for me…think he’s a genius on this upgrade..

…don’t really like cheap 3d printed plastic ..-here’s how I did mine-
The IP trickler mounted to the wall- the angle is crucial according to Paul-
I add a stainless “slip fit” polished stainless tube…
Everything mounted in silicon, or rubber to keep vibs down..

IMHO, best money spent-

Edit:
The IP trickler - is all ball bearings- no bushings to wear out- !!!!!

 

[454bore]

Thanks for all the input folks! Appreciate the feedback. That settles what my next purchase will be.

Thanks again!

 

[Shinbone]

The Autotrickler 3 works well, the Ingenuity Precision trickler works great!

 

[Captainjohn]

Is the IP now incorporated with the V4?

I don’t believe any of the IP upgrades work with the V4 auto trickler…

 

[muleystalker]

I don’t believe any of the IP upgrades work with the V4 auto trickler…

Yes, the IP trickler can be set up on a V4, IP makes a cable that makes it easier, I think it's $8.00. It replaces the slow feed tube.

 

[esromvre1]

I’m not going to lie. I’m happy as hell with all of my upgrades from him