• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ingenuity Precision Trickler (powder meter)

This question is aimed at those that have upgraded their Autotrickler by adding the Ingenuity Precision Trickler: Are you satisfied with the product? Is the benefit worth the cost? Any regrets?

Thanks

454bore
 
This question is aimed at those that have upgraded their Autotrickler by adding the Ingenuity Precision Trickler: Are you satisfied with the product? Is the benefit worth the cost? Any regrets?

Thanks

454bore
The IP may seem expensive and unnecessary to many (it did to me when I first found out about it).
Once you have it on your bench you will immediately see why it's actually a bargain. Paul is anal with precision and every single piece of this thing is pure precision. It was easy to put together and set up and is much faster and more accurate than the original V3 trickler.
My only regret is not buying in sooner.
 
The IP may seem expensive and unnecessary to many (it did to me when I first found out about it).
Once you have it on your bench you will immediately see why it's actually a bargain. Paul is anal with precision and every single piece of this thing is pure precision. It was easy to put together and set up and is much faster and more accurate than the original V3 trickler.
My only regret is not buying in sooner.
Is the IP now incorporated with the V4?
 
Should have came with the Auto throw from the start !!!!

71374106424__3235C30A-70C7-416D-BB02-B900AD7F51A5.jpeg I have recently upgraded my powder hopper-
2 stainless disk to cut off the powder- which should have been standard as well…good friend made for me…think he’s a genius on this upgrade..

…don’t really like cheap 3d printed plastic ..71374186594__840934E1-67AB-4765-A32D-501BDED8A7B7.jpeg-here’s how I did mine-
The IP trickler mounted to the wall- the angle is crucial according to Paul-
I add a stainless “slip fit” polished stainless tube…
Everything mounted in silicon, or rubber to keep vibs down..

IMHO, best money spent-

Edit:
The IP trickler - is all ball bearings- no bushings to wear out- !!!!!
 
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,542
Messages
2,198,130
Members
78,961
Latest member
Nicklm
Back
Top