• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

I Really Don't Know Why?

wildcatter,

Finally made it the range last week with the 200s & N160. I stopped at 63.5gr... because that's where it stopped as there's no data anywhere & I started low. Case fill was good, with no compression, with a note there's room to go higher if desired, easy extraction, & rounded primer edges.

Velocity was rather disappointing... 61gr gave 2579fps to start & the 63.5gr load tried was only 2719fps. Groups were not too bad, but... not sure if there's enough room in the case to get up to H4350s speeds. I loaded these middle of Jan. so dont remember exactly how full the brass was. No powder rattle when shaking, so... it's a good somewhat reduced load anyway. I may continue with N160 to see where the ceiling really is, or may try N555 next to get a feel for it in this cartridge.

Your rifle should be ready soon?
I think the 4350 would be better in the 225 or 250 grain loads. But I won't be finding out real soon! Seems PT&G prefers not to spend much on shipping? I just finally got a new delivery date from USPS on the reamer & stock package. Shipped the 3rd, and in Ohio this morning finally, supposed to be here by 9pm tomorrow?

This is the slowest moving shipment I have ever had, But it still beat the 90 day wait I was quoted when I made my order for everything. I can't wait to see this thing together, and more so how it shoots. I just hope I ain't disappointed going with the 338 over the 35 Whelen? Time will tell.

Bad thing is for the next 4 weeks I'm keyed more into Steelhead till the middle or end of April. The tribs off Erie are heating up, and I don't want to miss the action. So everything going bang is on the back burner for now. Flies are tied and my flyrods are ready. I'm sure when I get tiered of playing in the rivers, the rifle will be waiting to play with me.

If you find anything real sweet with accuracy and velocity,,, please let me know.
 
Last edited:
Well everything is here, I'm off to deliver the final components to my smith. The jewel trigger, reamer, and finally my stock! could only order it in 2 camo colors, so I added the grey as soon as it came yesterday. It needed some light color in it to break up the dark blob look. I really like lighter colors in any camo pattern.
20250318_120730[1].jpg


20250318_121552[1].jpg
Even lighter than I expected, advertised as 20 oz. this came in with the steel sling studs, aluminum pillars, and recoil pad included at under 18.5 oz. Thats what I was after, lightweight!
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,262
Messages
2,214,871
Members
79,496
Latest member
Bie
Back
Top