Hs Precision Stock... Bed???

[Shooting in the wind...]

Ok so if i bed the entire thing, should i just put the action in the stock and torque the front action screw down and leave the rear tang screw out??? Srry for the questions, i have never bedded a stock with a full aluminum bedding block in it already....

 

[Dusty Stevens]

Ok so if i bed the entire thing, should i just put the action in the stock and torque the front action screw down and leave the rear tang screw out??? Srry for the questions, i have never bedded a stock with a full aluminum bedding block in it already....

You dont torque either one. And the aluminum block is no different than wood or fiberglass. Its the exact same process no matter the substrate or epoxy

 

[Dusty Stevens]

Do this exact tutorial except do the back tang at the same time. Let gravity set your torque

http://forum.accurateshooter.com/threads/a-“quick-bedding”-tutorial.3994337/

 

[Shooting in the wind...]

Thanks Dusty Stevens, that will come in handy. Im gunna shoot it first and see how it does. Then if i have trouble ill bed it... thanks for everyone's help its much appreciated.

 

[LVLAaron]

https://rifleshooter.com/2017/01/bedding-an-hs-precision-stock/