Leo Smith
Gold $$ Contributor
So I just received my new Hornandy Pro Charger..I read the manual, The reviews, The Forums..And I started the process of using it.
For over an hour I coud not calibrate the scale...Finally I observed the scale protrusion opening. It was off center. Under the unit are 2 phillps head screws.. loosen them gently, Turn back upright. With a small screw driver or flat object, Center the Protruding scale in opening..You need to do this without the red scale pan on..Gently tighten the 2 screws underneath and re calibrate.. It will save you some advils.. I thought THEY DID THIS ON PURPOSE. But found no documentation anywhere to indicate it.,
For over an hour I coud not calibrate the scale...Finally I observed the scale protrusion opening. It was off center. Under the unit are 2 phillps head screws.. loosen them gently, Turn back upright. With a small screw driver or flat object, Center the Protruding scale in opening..You need to do this without the red scale pan on..Gently tighten the 2 screws underneath and re calibrate.. It will save you some advils.. I thought THEY DID THIS ON PURPOSE. But found no documentation anywhere to indicate it.,
