Are they preforming better for you over the 140 variety?I have yet to have any problems. 26" proof 8 twist, 6.5 creed, impact action. Running them @ 2740. Ive got about 600 down the barrel. i have enough bullets to burn this barrel down. I will report back if i run into problems.
Fingers crossed. This barrel and bullet really like eachother.
In the ELD-M realm? Yes. I/this barrel, prefer the 147. However, this barrel also loves a Berger 140 LRBT.Are they preforming better for you over the 140 variety?
Yes thanks, I will have to try a box!In the ELD-M realm? Yes. I/this barrel, prefer the 147. However, this barrel also loves a Berger 140 LRBT.
I believe Mid South has 250 for around $80 last I looked. Or was that Blue Collar?Yes thanks, I will have to try a box!
Thanks I did notice BC had some bulk quantities, I will look at mid south too.I believe Mid South has 250 for around $80 last I looked. Or was that Blue Collar?
A lil discoloration doesn't both me as they're gonna be highly deformed when I'm done with them. LolThanks I did notice BC had some bulk quantities, I will look at mid south too.
I don’t know if anyone else has noticed this and it doesn’t bother me, but the Hornady bulk bullets I have purchased from PV and BC have slight stains and discoloration compared to the pristine 100 count boxes.
IF it helps, I used the Precision Rifle Blogs testing articles and i started my seating depths @.065-.070 off. My creedmoor loads are 2.175 CBTO on a hornady comparator. Ive tried to run this bullet closer to the lands several times and it always ends up giving me trouble. I was skeptical because i never load my Bergers down into the neck shoulder junction and ive always had good results, but these didnt seem to mind. ( i also re-size with a bushing S die, and use an expander mandrel to set final NT.)Yes thanks, I will have to try a box!
Thank You, that will give me a great head start with that bullet!IF it helps, I used the Precision Rifle Blogs testing articles and i started my seating depths @.065-.070 off. My creedmoor loads are 2.175 CBTO on a hornady comparator. Ive tried to run this bullet closer to the lands several times and it always ends up giving me trouble. I was skeptical because i never load my Bergers down into the neck shoulder junction and ive always had good results, but these didnt seem to mind. ( i also re-size with a bushing S die, and use an expander mandrel to set final NT.)
Not necessarily the brand barrel but how the rifling was done and the bore finishing process.What's the brand of barrel have anything to do with it a .264 groove dimension is what it is.
Yep.garyatip is correct. The rpm of a bullet is established by the MV and twist. Once it leaves the barrel the rpm stays essentially the same. I think what the other gentleman was posting was based on the stability at given ranges with the SG calculated based on the stability using the downrange velocity rather than the MV.
No.Hello everyone,
New to reloading and come across these 147s you mention and bought a box with the intent on trying them in my old 1896 Swede.
Is this a bad idea?
I have continued to shoot the 144 Berger Hybrids in the 6.5-06 AI that regularly blew up the Hornady 147's (page 2 of this thread). It has more wear in the bore now and still no blow ups with the Berger and loading just over 3100 FPS. Not messing with the 147's anymore; can't recover from a 10 pt. loss in competition. If Hornady did anything about them, they've sure kept it a big secret. Maybe some lots were worse than others, but if so, also a big secret as to which ones.Any updates to the above experiences? I've been curious if Hornady resolved this?