h380 in 6mm remington

[ramchargerman]

i was playing with some extra powder i had on hand I'm looking for a load with h380 with a 105gr a a-max in my 6mm Remington found a load for a 90gr I'm new to reloading and don't know how to convert to a heavier bullet can any body help

 

[Chuckhunter]

ramchargerman, this is probably not the most suitable powder for this bullet weight. H-4350, RL-19, Imr-4831, would give you better velocities and fill the case better. That being said, I would start at 37.5 grains of H-380 and work slowly to about 41Gr's. according to my Quick Load program. I will caution you that H-380 varies greatly from lot to lot and is very temp, sensitive. Don't work up a load in cold weather and shoot the same load when the temps rise, as bad things can happen. Take that from a guy who knows. Good Luck and as always, be careful.