Nope. Easy peasy.
FX-120I price increase fyi
- Thread starter Sniper338
- Start date
Master Card? I had trouble with one in Canada this summer. The merchants were aware of MC being a problem.
Hello Everyone
Usually there is no issues with our site for processing but from time to time depending on the individuals bank there might be regional locks to prevent online fraud. A quick call to your credit card company will clear the issue up. There is no conversion fees when ordering.
Thank you again for the great response
Usually there is no issues with our site for processing but from time to time depending on the individuals bank there might be regional locks to prevent online fraud. A quick call to your credit card company will clear the issue up. There is no conversion fees when ordering.
Thank you again for the great response
Yep,did it today go to there site, put in your info, confirm order, done.
No it was visa.
Ordered on tuesday showed up today. Are there any things it should be kept away from ? Like tvs, stereos, computers and such. I would like to plug it into my battery backup but to do that i would have to have infront of my stereo speakers and beside my computer or run a short extension cord.
Thanks
Thanks
LarryDScott
Site $$ Sponsor
I paid $500.00 for mine plus 25.00 shipping. This I knew in advance of purchase, but what I didnt expect was a $10.50
credit card charge for an out of the country transaction. LDS
credit card charge for an out of the country transaction. LDS
Really? Mine was the same,500 +25.
When did the 10.50 show up?i used Visa
If they do that to me, I'll switch CC company's
John h.
CE Products, how much is postage to Sydney Australia for the FXi 120 and the auto trickler package? I think the aussie dollar is on par with the canadian $ at the moment and the FX1 is nearly $1000 alone over here.
LarryDScott
Site $$ Sponsor
Last edited:
Hello Micheal
Thank you for your question
I know the cost over in your part of the world is pretty expensive they also don't sell the FX-120i only the FX-300i which also adds to the higher cost.
Freight will be around $170-180 for 8 day service,We can ship it surface but it can be very slow. if you want to PM me your email and address I can get a more accurate cost for you
Thank you for your interest in our products
Regards,
Trevor
Good Afternoon TrxR
I would suggest keeping the scale away from interference as much as possible, electrical,vents windows or high traffic areas etc
a surge protector is a good idea as well in case of surges
if you have any other questions please feel free to contact us 1-800-535-3751
Regards,
Trevor N
CE Products Shopify
Just a quick little announcement for those who have existing FX-120i and autotrickler set ups we have a new Metal base upgraded replacement on for the autotrickler
https://ce-products.myshopify.com/products/adjustable-metal-base-for-auto-trickler-v2
They will be available in 2 weeks it can be shipped separate or added to a new order
if you have any questions please let us know
https://ce-products.myshopify.com/products/adjustable-metal-base-for-auto-trickler-v2
They will be available in 2 weeks it can be shipped separate or added to a new order
if you have any questions please let us know
The simple answer is to use an extension cord.
Your speakers make sound by pushing air, so that means your scale needs to be protected from that breeze . . . and vibration. While IME the FX-120i has been reasonably immune to RF noise, others have found some problem with certain anomalies in their wall voltage. Either way, the further from possible sources the less likely you are to encounter issues.
The only way to know for sure whether there will be issues in that location is to try.
Nice addition to the Auto Trickler is it the same height as the 3D printed base?
I drilled and tapped my 3D printed base with screws very similar to yours.. took all of 10mins to do and works perfectly.
Cheers Rushty
Hi Rushty
The Delta is 3" with the feet at their lowest position and 3.5" when the four feet are extended to their max length with 3.75" width
The Original 3D Printed base is about 2.85" Height and 3" width
Thank you for the Question
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.