• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

FT/R Stock---In Need of Suggestions

Well I have a McMiian XTI with McGee Hardware . Good Stock ..
I waited a long time for it and the GunSmith ?

I contacted Alex at Master Class I asked have you a stock that could be modified to look similar to XTI ?
I have Two really nice stocks .

Pays to ask and shop :rolleyes:
 
Down South said:
Bully,

I'm currently running a MPA hybrid chassis in FTR. It's their new chassis they came out with in the last year or so. MPA is very well known on the PRS circuit for their chassis. They made a couple modifications to their light chassis model. The hybrid has a 3 inch longer forend, 6 inch aluminum bag rider (mine doesn't have any angle to it but they may be able to modify it), low profile forend design, etc. cheek piece and butt are adjustable with set screws, not thumb wheel. There are also weights they can add in the forend and butt to make it heavier if you are under weight and want to get closer to the weight limit. Mine weighs 4 lb. 3 oz with moulded rubber vertical grip. They also make another grip that is 3 oz lighter if you need the weight savings. I was skeptical at first about trying this chassis after shooting wood stocks in FTR for years with great success but after trying it i really like it. The chassis feels solid when shooting, it doesn't have a ping/ringing feel to it like i thought it would being aluminum. I had this particular action/barrel in my Doan Trevor custom maple stock and it shot great. I took it out of the stock and bolted it in the chassis without skim bedding etc. Rezeroed the scope at 100 yards then proceeded to shoot a very tight group at 300 yards off the bipod in the chassis with the same load. I've since then shot it at 1000 yards in a few matches and it shoots just as good as it did in the Doan Trevor stock. I will shoot it in Raton next month at Nationals if anyone is interested in taking a look at it. If this is something you might be interested in give Al Olivier a call at MPA and he'd be more than happy to talk to you about it and answer your questions.

Here's my setup with the chassis to give you a idea of what you're looking at for weight.

MPA Hybrid chassis (4 lb. 3 oz)
Borden Rimrock SSR action (single shot)
30 inch Bartlein 5R heavy varmint contour barrel (5 inch 1.25 X .900 at crown)
NF Benchrest scope w/sunshade and Dan Pohlabel mirage cap (very heavy scope)
Jewel trigger
Flex bipod with picatinny attachment
Mirage shield

Total weight with all components 17 lb. 13 oz

There are a lot of good options out there as everyone has mentioned in this thread. This is just another one to consider.
Click to expand...

It looked really cool at LR Alley. I'd love to shoot a relay for you at Nats next month...just to test it out of course:D
 
Id go a Cerus RifleStocks F/TR stock. They just look amazing!!! I've just built a rig with a Kelblys 1M for F/TR. You don't need a full adjustable stock for F/TR I think. My current Barnard has a hybrid F/TR FO stock.
 
Quickoz said:
Id go a Cerus RifleStocks F/TR stock. They just look amazing!!! I've just built a rig with a Kelblys 1M for F/TR. You don't need a full adjustable stock for F/TR I think. My current Barnard has a hybrid F/TR FO stock.
Click to expand...
Beautiful but I am looking for something a little more versatile. I will probably only shoot this in matches but I'd still like something that I can use if I decide to do a PRS match some day (I found out there are a few somewhat locally) or if I want to do a tactical match.
 
Figured I would share this here as well as I've already emailed Bully.

Our A-6 PRS stock.

A-6 PRS
The Adjustable A-6 PRS shares all of the same features as our A-6, however the A-6 PRS has no butt hook. Instead, it has a 5/8" wide strait toe set at a 9 degree angle for riding in a rear bag. Its squared fore end makes it optimal for use with most tripod mounting systems as well as shooting off of barricades. It is ambidextrous and can be inlet for most Remington type actions. It is available with an integral adjustable cheek piece.

It is not on the website yet, but here is a picture showing the difference from the A-6.
 

Attachments

  • a6 and a6prs.png
    a6 and a6prs.png
    1.8 MB · Views: 68
BLCKWLF said:
Figured I would share this here as well as I've already emailed Bully.

Our A-6 PRS stock.

A-6 PRS
The Adjustable A-6 PRS shares all of the same features as our A-6, however the A-6 PRS has no butt hook. Instead, it has a 5/8" wide strait toe set at a 9 degree angle for riding in a rear bag. Its squared fore end makes it optimal for use with most tripod mounting systems as well as shooting off of barricades. It is ambidextrous and can be inlet for most Remington type actions. It is available with an integral adjustable cheek piece.

It is not on the website yet, but here is a picture showing the difference from the A-6.
Click to expand...
It's still one under consideration especially given how happy I am with my other 2 McMillan stocks.


Down South said:
No, I don't have any experience with that one.
Click to expand...
Gotcha. Thank you.
 
Or...
Do I just say "The HECK with it" and build an all out FT/R rifle and save the "versatility" for another gun. I have several stocks floating around and plans for a short 6.5. I can certainly use my current .223 as a plinker.
Hmmmmmm... decisions, decisions, decisions.
 
Bully said:
Or...
Do I just say "The HECK with it" and build an all out FT/R rifle and save the "versatility" for another gun. I have several stocks floating around and plans for a short 6.5. I can certainly use my current .223 as a plinker.
Hmmmmmm... decisions, decisions, decisions.
Click to expand...

That would be your best bet unless you just like the frustration of compromising your gear. :)
 
Bully,

Build a dedicated rig. Then you won't be hampered by a comprised setup. Been there. Tried it. Now have dedicated setups. Much easier and scores are higher. Most comprise I would do is run different stocks and different barrels on one action if you wanted to go that route.
 
I regret my compromise build.
-
So much time & nuance goes into getting these complex systems to perform at the highest levels.
Leave no stone unturned. The stock is your user interface.
Half measures will leave you wondering: "what if?"
If I shoot a 9, I want it to be all my fault.
If I change one variable, I want to see the effect.
The real challenge lies in discerning your personal preferences among a panoply of competitive options.
 
You must log in or register to reply here.

Similar threads

Bully
.223 FT/R Suggestions
Replies
18
Views
1,329
DirtySteve
DirtySteve
ar-15 for FT/R anyone?
Replies
14
Views
2,919
effendude
McMillan A3 for a Prone Stock?
Replies
0
Views
1,859
Scott Harris

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,764
Messages
2,224,024
Members
79,848
Latest member
Rugersdad

Share This Page

Back
Top