• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Frankford Universal Bullet Seater?

RCBS already done this,... sort of. I use the original RCBS competition seater and when I change to another caliber I can buy the guide and seater plug and convert the die to another caliber. This setup looks a lot like that design with the bullet drop window.
 
Lefty Trigger said:
RCBS already done this,... sort of. I use the original RCBS competition seater and when I change to another caliber I can buy the guide and seater plug and convert the die to another caliber. This setup looks a lot like that design with the bullet drop window.
Click to expand...
^^^^What Lefty said^^^^^

Robert
 
acloco said:
How about runout on loaded rounds?
Click to expand...
And the more important question, does run out matter?
For my application I have done the statistically significant testing and it does not matter.
If I have a choice between straight ammo and crooked ammo, I will take the straight ammo.
But for my application I know from my testing that it does not matter.
I have posted on my testing and results here several times so if you are interested in the test description and the results you should be able to find it with a search.
 
chkunz said:
And the more important question, does run out matter?
For my application I have done the statistically significant testing and it does not matter.
If I have a choice between straight ammo and crooked ammo, I will take the straight ammo.
But for my application I know from my testing that it does not matter.
I have posted on my testing and results here several times so if you are interested in the test description and the results you should be able to find it with a search.
Click to expand...

Runout may or may not matter, but controlling runout usually happens during sizing, not seating.
 
This looks a lot like the Vickerman dies I seat with, but I do have one question for owners of this one. Watched a video of it on YouTube and looked like the bullet was dropped in window. How is this possible. If I drop a bullet in the Vickerman window without bringing the case up it drops straight through. What keeps the bullet from dropping through until case is raised into position. Been thinking about buying one for the calibers I don't load often.
Thanks in advance
Doug
 
HTSmith said:
My question is do these dies yield consistent base to ogive measurements.
Click to expand...

My experience has been that a seater die, as long as it is straight, will do the job. All the magic happens during sizing. Base to ogive variations seem to be caused by how consistently the brass work hardens
and springs back.

So I guess my question would be about the quality of these new seater dies.
 
tred1956 said:
This looks a lot like the Vickerman dies I seat with, but I do have one question for owners of this one. Watched a video of it on YouTube and looked like the bullet was dropped in window. How is this possible. If I drop a bullet in the Vickerman window without bringing the case up it drops straight through. What keeps the bullet from dropping through until case is raised into position. Been thinking about buying one for the calibers I don't load often.
Thanks in advance
Doug
Click to expand...
If they are like the RCBS Matchmaster die I use, there is a spring retainer in the guide that keeps the bullet from falling through. Very handy to use and this looks to be a reasonably priced way to handle multiple calibers.
 
I have never used the die in question, but have used 2 different seater (RCBS Comp--Hornady) dies that use a bullet collar to line up the bullet and case. My findings are these dies give no better run-out #'s than standard dies and not as good a #'s as the Lee dead length bullet seater. I have found that a die (Forster---Redding) with a caliber chamber give me the best run-out #'s, but as @INTJ pointed out a lot happens during the sizing that relates to good run-out #'s in the end. JMO
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,839
Messages
2,204,555
Members
79,157
Latest member
Bud1029

Share This Page

Back
Top