Fluxeon Annie Owners Input Please - The Good and the Bad

[jimmymac]

Please do update us! thanks

Initial results are very good. In limited testing I've seen nothing negative on my targets. That is the big one to me. The other positives so far are that my shoulder bump is very uniform from case to case and more importantly to me, my bullet seating pressure is also very uniform. Keep in mind the brass has only been fired a couple times so I haven't experienced much in the way of work hardening. I'll be very interested in my results once I get about 8 to 10 firings on this set of cases.

 

[SeabeeKen]

Been using mine now for several weeks. I did have an issue with powering the water pump via the db9 connectore but that was the db9 pigtail and Garrett replaced it. I also had an issue with the timing chip and Garrett also made that right. Otherwise, I really like the machine. Very happy with it.. Excellent CS also

 

[kra961]

I've had mine going on 2 years now, zero issue's zero complaints Garrett is a good guy I highly recommend the Annie. Used a plex glass square with some all-thread for legs stand with a spring-loaded paint stick for the dump gate it only takes a few moments to run through 100 cases. my ppc cases setting is around 1.4 to 1.6 depending on the time of year and the room temperature.