The reason for low velocity is so I can make barrel last forever and to shoot prairie dogs.8 or 9 gr of IMR-trailboss
What's your intended purpose that it needs to be at 1,600 fps ???
The reason for low velocity is so I can make barrel last forever and to shoot prairie dogs.
That's like having a hot rod and never getting on the gas!!! I would put the powder to it and have fun with a fast flat shooting combo!The reason for low velocity is to make barrel last forever like a .22 and to knock down some prairie dogs. At 60 yards,maybe even save quite a lotta grains on gun powder.
I have hoid trail boss is a real good powder for reduced loads on most rifle calibers.8 or 9 gr of IMR-trailboss
What's your intended purpose that it needs to be at 1,600 fps ???
Will be sure to buy trailboss from now on,1040 fps seems mild low speed,same speed as a hyper .22 lr.+1 on trailboss. I haven't shot the 87 but I have a couple good loads at 1040 fps that are scary accurate at 100 and quiet with a can.
Am I reading this right? A 243 shooting 55 grain bullets at 1600 FPS to shoot prairie dogs?
The reason for low velocity is so I can make barrel last forever and to shoot prairie dogs.
Got 3lbs of 2400 very easy powder to find everywhere,used it before for my 357 lever gun.You might look into using Alliant 2400 powder as it is suitable for reduced rifle cartridge loading and it is not position sensitive within the case.