Does Hornady One Shot hurt anything?

[CaptainMal]

Use One Shot near exclusively. Before spraying I take a deep breath, spray and then walk away to exhale and breath again. Never liked breathing that residue into my lungs. Also never used or never will use the straw. Just spray out, over and some will go in the necks.

It works great and is fast. Everything else means each case has to be lubed one at a time. I have no patience for that.

 

[drop_point]

Get a gallon freezer bag, place the brass inside, seal the bag almost all the way, put the OneShot straw in the portion that isn't sealed, spray, shake bag, spray again, seal bag and shake again. Dump bag in a bin and allow to dry five minutes.

 

[Rob01]

Get a gallon freezer bag, place the brass inside, seal the bag almost all the way, put the OneShot straw in the portion that isn't sealed, spray, shake bag, spray again, seal bag and shake again. Dump bag in a bin and allow to dry five minutes.

That’s the way to do it but you don’t have to wait 5 minutes. A minute or two is fine but I dump mine in a box and go back and do more so it usually sits there for 15 min before I start sizing as I usually do 500+ at a time.

 

[drop_point]

That’s the way to do it but you don’t have to wait 5 minutes. A minute or two is fine but I dump mine in a box and go back and do more so it usually sits there for 15 min before I start sizing as I usually do 500+ at a time.

I usually do very large lots, too. I could never sit and rub on wax on 500-1000 piece lots.

 

[Doug Casner]

I like carbide dies. Doug

 

[Rob01]

I usually do very large lots, too. I could never sit and rub on wax on 500-1000 piece lots.

Me either. Would be torture.