Thanks. Not sure why that wasn't coming up during my google search. I also found one from LRI and am now torn between the LRI and Dima one
Checkpiece mechanism
dimars.com.ua
Do it yourself Stock making thread
- Thread starter joshb
- Start date
I ordered the Dima. Looks a little more friendly to inlet into the stock also.
Thanks. How tall in the buttstock area?
I will measure up 1 of my stocks tomorrow and and pic aswell for you .
joshb
Gold $$ Contributor
Thanks. All the rough shaping is done. Final shaping of the grip area should happen today, using a palm sander.
The only pain in the ass was the recoil lug. The factory set up had the lug about 10 degrees off center. I pulled it apart and set it straight, but it damn well reminded me I’m getting older. I had to use a cheater bar and some heat to get it apart.
The only pain in the ass was the recoil lug. The factory set up had the lug about 10 degrees off center. I pulled it apart and set it straight, but it damn well reminded me I’m getting older. I had to use a cheater bar and some heat to get it apart.
Attachments
joshb
Gold $$ Contributor
I have a boomer I figured I’d put in that. 270/7mm WSM and a spare 300 WSM barrel.
Thanks
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.