• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Dasher in a Rail Gun...?

IdahoSharpshooter

I am getting a rail gun in a couple months. It's first barrel will be a 6mm. I am considering either a standard 6BR or a Dasher. NO, I don't want a PPC.
I am curious, how much fast a twist to order. I will likely shoot 300yds or less. It will be a "fun gun", just to enjoy shooting small groups.

The question: how much, if any will the standard Dasher 1:8" twist harm accuracy, compared to a 1:12"? I'll be shooting mostly 65-70gr bullets.

thanks,

Rich
 
"Fun Gun" for out to 300...........6BR.....Plug & Play. Please post a few pics when it arrives...........:cool:

Regards
Rick
 
I shot a 6 BR rail for many years,,,it would group as good as a PPC,,,I just am not as good a shot as the traveling pros,,,,mine was 14 twist,,,if you shoot a Dasher in long range comp. it would make an excellent test bed for your loads,,,just remember what bullets you want to use/test and get the twist appropriate for that bullet,,,Roger,,,
 
This may be a dumb question, but considering the cartridge and bullet weights you listed, why not use a barrel with a 1-14" twist rate?

I shoot a 6mm Bench Rest with a 1-14" twist rate, and with bullets up to 80 grains, nothing shoots any better.
 
If i did a Dasher it woukd be an 8 twist to shoot the big bullets. I bet it would handle conditions pretty well. If I did the 6 BR it would be a slower twist. Matt
 
Use the 14 twist and the 70-80 pills . Why shoot heavier ? Your not going long range and not trying to kill anything but the paper . No sense in beating your equipment.
 
I have a Dasher coming to me very Soon ?
I went 8 twist the plan is 300 to 1000 .
I have the New Brass with .050 longer neck.
I also will shoot 105 Berger's and 103 Vapor Trails .

I would go 8 ...:rolleyes:
 
IdahoSharpshooter said:
I am getting a rail gun in a couple months. It's first barrel will be a 6mm. I am considering either a standard 6BR or a Dasher. NO, I don't want a PPC.
I am curious, how much fast a twist to order. I will likely shoot 300yds or less. It will be a "fun gun", just to enjoy shooting small groups.

The question: how much, if any will the standard Dasher 1:8" twist harm accuracy, compared to a 1:12"? I'll be shooting mostly 65-70gr bullets.

thanks,

Rich
Click to expand...

Rich,
I would go with A 6BR, 12 or 8 twist, but I would go with a 80 gr bullet out to 600yds. Now if you are looking at doing some long range, I would go with 8 tw Dasher or the new 6BRAI.

Mark Schronce
 
thank you all. Sound advice, based on actual experience.

I had a thought to get a "do it all" twist, like a 1:8". But, I am now convinced that a 1:12" will be the best option in terms of accuracy, and be able to shoot all of the custom bullets up to about 80gr.
 
IdahoSharpshooter said:
thank you all. Sound advice, based on actual experience.

I had a thought to get a "do it all" twist, like a 1:8". But, I am now convinced that a 1:12" will be the best option in terms of accuracy, and be able to shoot all of the custom bullets up to about 80gr.
Click to expand...
If was gonna shoot at 100 to 300 with that rail gun I would shoot a 30 br with those Bart s bullets.
 
Ive shot a railgun with bigger cases and faster twists and didnt think it worked very well. I wouldnt go faster than a 12” or bigger than a 6br (cant imagine putting anything but a ppc in one myself)
 
IdahoSharpshooter said:
I am getting a rail gun in a couple months. It's first barrel will be a 6mm. I am considering either a standard 6BR or a Dasher. NO, I don't want a PPC.
I am curious, how much fast a twist to order. I will likely shoot 300yds or less. It will be a "fun gun", just to enjoy shooting small groups.

The question: how much, if any will the standard Dasher 1:8" twist harm accuracy, compared to a 1:12"? I'll be shooting mostly 65-70gr bullets.

thanks,

Rich
Click to expand...
IMO this is the sort of question you must answer yourself.....you've got the goods.

I've got a rail and 5 barrel blanks ranging from 1:16"t to 1:8"t that I haven't played seriously with yet but when I do that's one of the questions I'll be working on (since I've already settled it to my satisfaction in BR and varmint-style guns)

Please share, whatever you find :)
 
To those of you with rail guns: once you have a barrel set up, do you ever switch barrels? I've had a couple excellent suggestions to fit a 30BR barrel instead. Is it a bigger PITA to switch than the extra "fun factor"?

thanks,

Rich
 
You must log in or register to reply here.

Similar threads

H4350 in a Dasher.
Replies
8
Views
3,976
RDavies
Rail Gun
Replies
9
Views
2,982
RGraham
jackieschmidt
Jackie Schmidt Rail Gun Project
2 3
Replies
46
Views
21,503
RGRobinett

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,280
Messages
2,215,486
Members
79,508
Latest member
Jsm4425

Share This Page

Back
Top