The only case that has SAAMI specifition is the 6 mm BR . The rest are wildcats so their no specifications.Thanks for the link.
6 BR neck, 0.322"
6BR-DX neck, 0.283″
6 Dasher neck, 0.246"
6 BRX neck, 0.210"
6 BRBS neck, I didn't find a specific number or drawing but if the shoulder is moved forward 0.120". If all of that is subtracted from the neck then the remaining neck would be 0.202".
Isn't the BRX generally a br with th shoulder blown .100" forward? That would put the neck at .222" wouldn't it?Thanks for the link.
6 BR neck, 0.322"
6BR-DX neck, 0.283″
6 Dasher neck, 0.246"
6 BRX neck, 0.210"
6 BRBS neck, I didn't find a specific number or drawing but if the shoulder is moved forward 0.120". If all of that is subtracted from the neck then the remaining neck would be 0.202".
Isn't the BRX generally a br with th shoulder blown .100" forward? That would put the neck at .222" wouldn't it?
Isn't the BRX generally a br with th shoulder blown .100" forward? That would put the neck at .222" wouldn't it?
i think their is two Norma is the one normally used . LarryI looked at the SAMMI site, here http://saami.org/specifications_and_information/index.cfm?page=CC
Quite curious that I didn't see the 6 BR. Am I missing something?
I didn't look LarryI did not see either one on the SAMMI site. Did you?