Cleaning Rod Holder

[nmkid]

Almost done with a complete redo of my loading room (garage). As I start putting things back I've found myself with one predicament, where to put my 8 cleaning rods. Before I insulated and put sheetrock up I just placed 2 nails on exposed wall studs and used that as a holder for the rods. Now with finished walls, I don't want to do that. How do you store your cleaning rods?

 

[EGBrown]

this is what I use...

Cleaning Rod Rack | Tipton

Cleaning Rod Rack

www.tiptonclean.com

 

[Kittitas George]

this is what I use...

Cleaning Rod Rack | Tipton

Cleaning Rod Rack

www.tiptonclean.com

I also use these, inexpensive and work well. Use anchors and screw to the drywall. Be sure to use big enough anchors, you are not hanging a picture.

 

[STOMP442]

This is what I use for mine. Works great, cheap and easy.

Robot or human?

 

[Cecil S.]

A cheap fishing rod holder might work.......just sayin.

 

[snert]

I use fly rod holders that look curiously like cleaning rod holder above...love them

 

[markT]

Buy some 2"x2"x1/8" angled aluminum at Tractor Supply. Hack saw / band saw / Dremel / round file..

 

[jpx2rk]

I built a "stands in the corner" one out of 4" PVC pipe with a toilet flange (new one ) as the base with smaller 1/4" & 1/2" pvc pipes inside the 4" pipe to keep the rods seperated. Holds about 8 with ease.

 

[K22]

Fishing rod holder which works just great with Dewey rod handles.

 

[pikespeakgoat]

Just recently ordered one of the inline fab holders:

Screwdriver/cleaning rod rack. - Inline Fabrication

This handy rack is perfect for screwdrivers, cleaning rods, primer rod, etc. It is 6 3/4" wide Wall mount or...

inlinefabrication.com

 

[Want2BS8ed]

I’ve had a couple of these for a few years now…

SINCLAIR INTERNATIONAL SINCLAIR CLEANING ROD WALL BRACKET

Check out SINCLAIR INTERNATIONAL SINCLAIR CLEANING ROD WALL BRACKET available Online at Brownells Today and many more Gun Cleaning Rods products are available in our Tools & Cleaning Department.

www.brownells.com

…but good-googly-moogly, I don’t remember them being that expensive!

 

[stavey]

I use this fishing rod holder. Works great.

 

[Dave M.]

I use this fishing rod holder. Works great.View attachment 1459068View attachment 1459079

I use the same one and they are awesome and cheap. I used some JB weld to attach magnets to the back of the rod holder and then attach it to the side of my large safe in the reloading room.
Dave

 

[newbieshooter]

Organize Your Gun Room With Tipton Cleaning Rod Racks « Daily Bulletin

Cleaning Rod Rack Costs Just $7.99 Looking to better organize your reloading room (aka man cave)? Here's a handy, affordable product that will help you organize gear in your reloading room or man cave. Tipton's <a href=https://www.tiptonclean.

bulletin.accurateshooter.com

Store Your Cleaning Rods with Handy Fishing Rod Racks « Daily Bulletin

Forum member Nodak7mm has discovered an ideal way to store your rifle cleaning rods in your garage or loading room. Using inexpensive Berkley Horizontal Fishing Rod Racks, Nodak7mm has secured a half-dozen Dewey rods on the back of a door.

bulletin.accurateshooter.com

 

[J.J. Coe]

$1.25 from the dollar tree.

 

[Shooter13]

I store mine in the PVC carry case I built, serves a duel purpose to carry and store, always wipe it down (rods) after cleaning guns and for storage.

 

[coldboreshot]

I made a floor stand with pvc pipe and a stable base. It collects all the rods in a compact space.

 

[AndrewB]

I took 2 2 inch long sections of 4 inch in diameter pvc pipe and mounted those horizontly about 32 inches apart under a shelf. Drill a hole in one side of the pvc to fit a screwdriver thru and a small hole on the other side. Put a screw in the small hole and use the larger hole to drive the mounting screw into the wall studs

Lay the cleaning rods in the pvc bands sideways. By mounting under a shelf you dont lose storage space and this also avoids eating up floor space that way. We all need to maximum room for our "stuff"

I label the handles for the diameter of the rod - 22, 6mm, 30, etc - and put clear packing tape over that so the labels last much longer under the attack of the 15 things I am always using to figure out what cleans the best and easiest. Opinion varies daily

 

[Just Say Moe]

I put together one out of scrap wood. The bottom has divots for the handle ends to sit in and the top just a hole. I was going to replicate the hanging style, but I preferred the tops and bottoms to be secured so I opted for the bottom up approach.

 

[Eagle Six]

Simple, cheap, effective....