Case lube

[Link]

I have tried some products. This seems to work the best for me. Lay my cases on a pad, light spray. roll em over 1/2
way another light spray, roll em back in forth on the pad then clean before sizing. RCBS case slick.

 

[HTSmith]

How is it to get off the cases? Sticky?

 

[M-61]

I tried one product in 1963/4
RCBS lube
No need to change

 

[Fire Dog]

Imperial Die Wax or even better if you can find it, Ballistic Case Wax.
Both require just “a little dab to do you”… easily removed {unlike RCBS oily lube} and never a problem with hydrologic dents in case shoulders.
One tin will last most folks a lifetime…

 

[Link]

How is it to get off the cases? Sticky?

No It has a slight oily film on them after resizing. I take about 10 of them and hold them in a clean rag and rub the bunch together. I have tried several aerosol types, and they are no where near as good. I have about 20 firings on some 6br brass and now they are getting a slight bolt click upon extraction. Maybe it's the lube. ;]
Those are the ones I run through the 30 06 die to catch the .2 line. Then they are good for about 4 firings before I do it again.

 

[bozo699]

Imperial Die Wax or even better if you can find it, Ballistic Case Wax.
Both require just “a little dab to do you”… easily removed {unlike RCBS oily lube} and never a problem with hydrologic dents in case shoulders.
One tin will last most folks a lifetime…

^^^^^^^
Wayne

 

[Murray Brook]

I've been using Lee lube for over 40 yrs with zero problems. Very easy to wipe off the case after sizing. JME

 

[rlporter507]

This has been hashed over before, at least once I know of. What works and you like is the best. I have used imperial for all my rifle loading for years and it has worked well for me. But the last time this was discussed, Royal was mentioned several times with high marks. I got a jar to try it, and I found it seemed to size a little easier, smoother, is a bit thinner, I think body heat thins it a bit, and it sized very consistent just like everyone had said.
Now I'm a royal fan.

 

[charlie b]

I got hooked on the Hornady spray. Too easy. Lube outside of case and necks at same time.

 

[SeabeeKen]

This has been hashed over before, at least once I know of. What works and you like is the best. I have used imperial for all my rifle loading for years and it has worked well for me. But the last time this was discussed, Royal was mentioned several times with high marks. I got a jar to try it, and I found it seemed to size a little easier, smoother, is a bit thinner, I think body heat thins it a bit, and it sized very consistent just like everyone had said.
Now I'm a royal fan.

Best case lube ive used is royal. Comes of easily and super slick. When imperial chattered in the die during forming royal did not. Have the tub, aerosol, and pump. Prefer pump