Burris Signature Zee Rings Versus Lapping Other RIngs

[Jeff A]

I have used Signature Z Rings or the XTR rings on my last 3 installations. I hope I never have to back to the old way. A solid, no slip installation and noo ring marks. I also needed to adjust the MOA cant on two rifles. So easy with the Burris products.

 

[Dos XX]

I did a little trick with my Burris signature rings. I got rid of the cross bolt they have and drilled out for 10-32 and tapped it the redrilled the other side for a clearance. hole. I got longer cap screws so the threaded part is not against the mount and cut them off to fit. They are .187 just fit in the slot and you can tighten them to 65 inch pounds...... Jim

Great tip. Thanks.

 

[johara1]

Remember a weaver base is not as deep as a true Picatinney, cross slot is .206 and about .170 deeps the .187 will clear, just push the ring forward enough to be tight against the vertical part of slot. ....... Jim

 

[6MMsteve]

I use signature rings on everything. They are awesome rings, no slipage, no ring marks, and you can put cant into the rings.

The only downside to the regular signature rings is they are steel and can rust. However the XTR II rings are aluminum so no issues there.

The XTR II rings are very robust with six screws per ring, very nice rings

yes they is huge, XTR Signature rings are awesome strength & flexability

 

[BW64]

They really allow you to dial up some distance.


BW