ELR LVR
Silver $$ Contributor
plus an ADDITIONAL 1/4 turn??? :O ----after bottoming out? ---- for a SEATING DIE?Well i dont know how that worked but maybe my die was set too deep? According to the lee die setup instructions it asks you to screw the die to the shell holder plus an additional 1/4 turn but it seems that backing off a 1/4 turn is what it needed?
---------------------------------------
That may be true for the SIZING DIE just to ensure camover/shoulder bump
-
-
but for a seater it dont need to be even touching a shellholder at all
, you can likely be a full turn or even more out from bottomed out
Glad you got it figured out though
Looked like the case was bottoming out inside the die, which will of course - Shorten the case
Physics
----------------------------------------
If you are wanting to crimp bullets, keep the crimp clear of the neck while performing the actual seating process
Live and learn, its alright
Last edited: