gkgeiger
Silver $$ Contributor
You’re correct, but just delete the word ‘properly’.They are sensitive to liquids. If the cleaning fluid gets into inside they will not work properly.
You’re correct, but just delete the word ‘properly’.They are sensitive to liquids. If the cleaning fluid gets into inside they will not work properly.
No, I have 2 new ones and opened them up, no mods or clean up. This should be a step they implement ASAP!Absolutely not.
I was not trying to bash the product but it has limitations. First time it quit working during the match and I fund cleaning fluid inside. I tried to be careful and not to get it soiled but recently it happened again.You’re correct, but just delete the word ‘properly’.
Sounds like your bore guide isn't working correctly! There is also a reason all gun cradles slope downward (muzzle down). Hope you find what caused it. I'd also replace the o'ring on the bore guide, they do wear out.I was not trying to bash the product but it has limitations. First time it quit working during the match and I fund cleaning fluid inside. I tried to be careful and not to get it soiled but recently it happened again.
What bearings are you replacing them with?I still polish and replace bearings in every one.
Why would someone buy one of these B&A over a Trigger Tech Diamond? Also, my Jewell trigger has given me flawless operation for 25 years
I thought I'd try a TT and it wouldn't fit in my Panda trigger hanger(s). The TT is a sweet breaking trigger though. JME. WDWhy would someone buy one of these B&A over a Trigger Tech Diamond? Also, my Jewell trigger has given me flawless operation for 25 years
That is wrong. For the last couple years they're polished as they come.Absolutely not.
What did you trace back to the non-carbide bearings? I did the polish to mine and that did the trick, just curious what to look for regarding bearings.5mm carbide. But you dont have to. When I first figured out the issue I was also replacing the bearings just because. I actually stopped doing that for a couple of years because I was not tracing actual issues to the bearings. Until one day I did. Back to replacing the bearings. The polishing will fix 99% of them.