Best custom 700 action?

[kyotekiller25]

I doubt you would need a trigger hanger for your application.

Ok. What exactly does the trigger hanger do? I was under the impression you needed it for the trigger tech diamond's as they don't have the bolt release?

 

[Kracken McGraw]

Ok. What exactly does the trigger hanger do? I was under the impression you needed it for the trigger tech diamond's as they don't have the bolt release?

I’ll have to let the experts explain, but I think it’s more for glue in’s.
Most clones have a side bolt release, so that you don’t need a bolt release on the trigger.

 

[LuvDog]

Trigger hangers are nice if you think you are going to have to swap a trigger in the middle of a comp and your action is a glue in, but except for BR, it's probably not needed.
But the benefit is that you can time the trigger with different size hangers, but not all manufacturers have different hangers for that.
The downside is that not all stocks/chassis can take a trigger hanger without some slight modifications

You don't need a trigger hanger for a TT Diamond. And 700 clones have a side bolt release and not the button like a Remington

The ARC CDG has an adjustable trigger hanger so you can turn a set screw and time the trigger. But it's 70* throw.

Honestly, I'd find whatever you can in stock and for a great price and go for it.

These are ones I own that have integral rails and are 90* (some have an option for a shorter throw bolt as an add on/replacement). You can't go wrong with any of them.
Defiance Deviant (but I'd probably go with the Ruckus so you could get prefits if you wanted to in the future)
Lone Peak Fuzion
Kelbly Prometheus
Impact 737

 

[Kracken McGraw]

Side bolt release.

 

[Kracken McGraw]

https://www.bugholes.com/Defiance-Classic-rifle-action-p/def-class-sa-
308.htm
Here’s another option and it has the same barrel specs as the Ruckus.

 

[mtncwru]

Bolt throw I don't care one way or the other, standard 90 is ok with me, as 75 and 60 just feel kinda weird since I've used the 90 for all 30 years of my life already. 2 or 3 lug, that doesn't really matter to me as I don't know enough difference to go one way or the other honestly. I would like to use a trigger tech trigger that will go down to 8 oz to 1# so probably need a trigger hanger for that.

If you want a 90 degree bolt throw you'll want a 2-lug action. Most 3-lug are going to be 60 degree bolt throws.

TriggerTech triggers seem to do just fine without a trigger hanger: that's what I have on my Origin and they're doing fine with standard pins.

 

[FTR_Mojo]

Borden BRM. Just a magnificent action.

The only downside is that you might have a long wait to get one. But in my experience, its worth it.

 

[kyotekiller25]

Lots of great info here. Thanks guys.

Does the Kauger accept prefits if I chose to go that route later on down the road?

 

[mtncwru]

Lots of great info here. Thanks guys.

Does the Kauger accept prefits if I chose to go that route later on down the road?

Absolutely, both shouldered and barrel nut. @urbanrifleman has you covered there including some really nice long options in 6mm: https://theurbanriflemanstore.com/shouldered-prefit-barrels

 

[Woollybugger]

Kauger CRS 80degree bolt, semi-cone bolt head. Available with or without a trigger hanger. Or a dual port single shot.

 

[Kracken McGraw]

Kauger CRS 80degree bolt, semi-cone bolt head. Available with or without a trigger hanger. Or a dual port single shot.

Do all of their actions have those double ejectors?

 

[kyotekiller25]

Absolutely, both shouldered and barrel nut. @urbanrifleman has you covered there including some really nice long options in 6mm: https://theurbanriflemanstore.com/shouldered-prefit-barrels

Nice. I would prefer the shouldered prefit versus the barrel nut, as I think it's hideous and just reminds me too much of a Savage lol.

So when it asks what bolt nose you want, it lists semi cone (standard) or recessed (remage) I'm not sure what that means, or what I would want to get? I want a barrel chambered by my smith first and foremost, with the 2nd option later down the road for prefits. Can you do prefits on the semi cone (standard) or just the recessed (remage) which I'm assuming IS for prefits?