• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Baddest short action caliber

I just ran the numbers and the 308 caliber 180 Elite by Berger, if leaving the barrel at 2650 fps, at 3000 ft. elevation is still traveling 1877 fps at 600 yds. I would rather shoot a 180 Berger at elk than a 147 Eld-m, but that is personal preference of course.
 
Jason_A said:
I just ran the numbers and the 308 caliber 180 Elite by Berger, if leaving the barrel at 2650 fps, at 3000 ft. elevation is still traveling 1877 fps at 600 yds. I would rather shoot a 180 Berger at elk than a 147 Eld-m, but that is personal preference of course.
Click to expand...
The dead elk won't know the difference either way. Thinking you could actually get 2750 from a 308 with that elite hunter bullet.
 
284winner said:
The dead elk won't know the difference either way. Thinking you could actually get 2750 from a 308 with that elite hunter bullet.
Click to expand...

Yeah I have been wondering what velocity could be had with that bullet too. On a different forum guys have been getting close to that speed with the 185's over 2000mr.
 
There is a LONG overlooked cartridge that made a splash "more than a few years ago".. Large caliber, excellent bullets will cause tremendous tissue destruction, which causes loss of blood and a quick death. The cartridge I am espousing here is a wildcat BUT very easy to make. Just buy the new "Shiraz Norma" .284 brass, neck it up to .338 and fireform it is a .338-.284 Shehane chamber. Shoot the 210 Nosler powered by either RL-16 or possibly RL-23 somewhere in the vicinity of 2700f.p.s. That should put the hurt on an Elk out to a comfortable 300+ yards. Large caliber bullets tear up lots of tissue. Large caliber bullets with the excellent characteristics of the long proven Nosler Partition, leave little doubt of their effectiveness!
 
Last edited:
Jason_A said:
Yeah I have been wondering what velocity could be had with that bullet too. On a different forum guys have been getting close to that speed with the 185's over 2000mr.
Click to expand...
I pushed 185 vlds around 2700-2725 easily with a 26" barrel. Temps were warm but elevation was only 4000 ft. 180s would do 2750
 
I don't think you can back any more whop into a SA than a 6.5 SAUM. If you're going 0-600 the 7s are probably your Huckleberry. 284 or 6.5x284 aren't in my top 20 picks.
 
284winner said:
They would be if your bolt face was limited to a 308 as in the OP.
Click to expand...
It not limited, gunsmith open the most up and put in Sako extractors all the time. In fact the Sako is a stronger extractor then the Rem and opening up the bolt allows the gunsmith to true the bold face. Both are better things. Matt
 
With gunsmiths, the sky's the limit really. Based on a .473 bolt face was the question. Assuming maybe he wanted a switch barrel rifle in that biolt face. Kinda tough to swap Remington bolt faces or Sako when needed.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,073
Messages
2,189,541
Members
78,688
Latest member
C120

Share This Page

Back
Top