Anyone know where to find 7mm/08 brass?

[koger]

Only one I can find is Nosler and at a inflalted price. I would prefer Remington, Winchester, Federal, Lapua or Norma. i have not had good luck with Nosler brass, anyone used this in 7mm/08?

 

[rijndael]

Have you considered necking down 308 brass? You can do it in one pass.

 

[TylerFromMS]

7mm-08 Alpha Hunter | Alpha Munitions

Price includes shipping

alphamunitions.com

 

[Gargoyle]

I have two 7-08 rifles. Never bought 7-08 brass. 308 necks down with no issues. Maybe a second trip through the die to get the shoulder bump spot on.

 

[Liven The Dream]

I would try Peterson .308 Small Primer ?

 

[JLT]

7mm-08 Alpha Hunter | Alpha Munitions

Price includes shipping

alphamunitions.com

That's the ticket, right there. Alpha is excellent brass!

 

[HandgunHTR]

Not a sources for brass, per se, but normashooting.com has a sale on their ammo. You could buy a couple of boxes of it, shoot it and then have Norma brass.

 

[dhagerty40]

you can order Starline brass. even though it shows backordered, it normally ships within 3 weeks.

A hint on on Starline, If the circle next to caliber is green, it is available for immediate shipment. A Brown Circle shows the Brass is in Production, but will show Backordered but can order the brass. If a Red circle, The caliber is not in Production and you cannot order.

https://www.starlinebrass.com/7mm-08-remington

 

[Phil McGrath]

Size your 308 brass in a 308 sizer first then again second sizing in your 7-08 sizer for closer oal neck length. Running 308 brass in a 7-08 sizer one pass only, just nets you short necks.

 

[koger]

thanks for all the feed back.

 

[Infrequent Shooter]

I have read that necking down 308 lapua to 7-08 issue is shorter case. What is the downside of shorter case please. 2.035 vs 2.015 length, give or take.

 

[DShortt]

you can order Starline brass. even though it shows backordered, it normally ships within 3 weeks.

A hint on on Starline, If the circle next to caliber is green, it is available for immediate shipment. A Brown Circle shows the Brass is in Production, but will show Backordered but can order the brass. If a Red circle, The caliber is not in Production and you cannot order.

https://www.starlinebrass.com/7mm-08-remington

I just bought some Starline 7mm-08 brass a couple of months ago. I've always been happy with Starline.

 

[Walt Krafft]

Sig has 260 brass in stock on their web site. Should easily neck up.

 

[HandgunHTR]

Starline is showing "backorder" as a status, which means it will take them all of 3-5 days to ship it to you.

Alpha brass is in stock right now.

 

[nakneker]

Powder valley has Prvi and Nosler. Natchez has Alpha.

Prvi Partizan 7mm-08 Remington Brass 50 Count

Prvi Partizian Unprimed Brass 7mm-08 Rem (50) WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.

www.powdervalley.com

Nosler 7mm-08 Remington Brass 50 Count

Nosler Unprimed Brass 7mm-08 Rem (50) WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.

www.powdervalley.com

Natchez

www.natchezss.com

 

[FNSafari]

Did you ever hear of grafs.com

7mm-08 Remington - Rifle Brass - Metallic Reloading - Graf & Sons

www.grafs.com

 

[dhagerty40]

This was started December Last year, so I am assuming the OP has found some...

 

[Idaho-Lefty]

Since the Covid ERA ( and, Pre-Hoarding, Days ) I started making, a List of about 15 or so, Suppliers and I have had, NO "problems" finding anything, except Lge Rifle Primers ( at reasonable Prices ).
You just gotta look and Back Order stuff, as it WILL, come In !
IMO, the NAMMO Group, needs to Buy / Build, a Top Line, PRIMER Mfg Business, to go with selling, Berger Bullets & Lapua Brass,.. that, would be,.. Sweet !

 

[DShortt]

This was started December Last year, so I am assuming the OP has found some...

Dang. Zombie threads generally don't bother me if it's a technique discussion.

Material availability. Old threads are pretty much worthless and I never noticed.

Doh!!!

 

[Phil McGrath]

I have read that necking down 308 lapua to 7-08 issue is shorter case. What is the downside of shorter case please. 2.035 vs 2.015 length, give or take.

The potential for a nice carbon ring, that why I suggested sizing with the .308 sizer first then following up with the 7-08 sizer.